| | |
325mm Wooden Rotor Blade (RCT0091-XT) Ref: 3417 High quality wooden blade for Trex 450, Blade 400(with spacers) and most 450 sized helisBlade Length ( tip to tip) - 325mmBlade Root thickness - 5mmBlade bolt hole size - 3mmBlade approximate weigth - 18~19 gramsSuitable for mild aerobatics and mild 3D.
Price: £6.77 (£7.95 Including VAT at 17.5%)
|  |
|
 |
THPH325CF : ThunderPower Carbon Main Blades 325mm Ref: 3391 High Quality & performance Carbon Main Blades from the Thunder Power company (Well known for their Lipo Batterys) These blades are aimed at all levels of pilot right upto extreme 3D but are very competitively priced with no compromise on quality. Will fit T-Rex 450, Mini-Titan (With included spacers), Furion 450, Rave 3D etc
Price: £28.65 (£33.66 Including VAT at 17.5%)
|  |
|
 |
Kopter Case Ref: 2544 Carry case for 450 size helis.Blue Silver with carry strap and full foam inlay. <more>
Price: £34.03 (£39.99 Including VAT at 17.5%)
|  |
|
 |
Deans Connector Female Ref: 1301 These connectors are the Genuine Ultra Deans1 only female Ultra Deans Connectors
Price: £2.17 (£2.55 Including VAT at 17.5%)
|  |
|
 |
Deans Connector Male Ref: 19 These connectors are the Genuine Ultra Deans1 only male Ultra Deans Connectors
Price: £2.17 (£2.55 Including VAT at 17.5%)
|  |
|
 |
Medusa 3.5amp 5 volt BEC Ref: 1969 Max Voltage input:45Volts, Min Voltage Input:8VoltsCont Current:3.5Amps, Peak Current:4.5Amps!Max Servos: 8 servosW:30mm, L:50mm, T:13mmWeight: Only 13gmsOutput to Servos 5.0 volt, 12 to 33 Nicad/Nimh cells or 3 to 10 Lipo Cells.
Price: £28.51 (£33.50 Including VAT at 17.5%)
|  |
|
 |
Medusa 3.5amp 6volt BEC Ref: 1925 Max Voltage input:45VoltsMin Voltage Input:8VoltsCont Current:3.5AmpsPeak Current:4.5Amps!Max Servos: 8 servosW:30mm, L:50mm, T:13mmWeight: Only 13gmsOutput to Servos 6.0 volt, for optimum power and speed; please ensure your onboard radio gear is suitable for this voltage12 to 33 Nicad/Nimh cells or 3 to 10 Lipo Cells. more
Price: £28.51 (£33.50 Including VAT at 17.5%)
|  |
|
 |
Medusa 2amp 5 volt BEC Ref: 1926 Medusa Research's Battery Eliminator Circuits eliminate the need for a separate battery pack to run the receiver and servos by stepping down the voltage of the main battery. Output to Servos 5.0 volt : suitable for all radio applicationsW: 20mm, L: 22mm, T: 10mmWeight only 10gmsIdeally suited to power upto 5 servos having a constant current rating of 2Amps with a peak rating of 2.4 Amps.Takes input from 5V to 35Volts max hence suited for 6 to 25 nicad /Nimh cells or 2 to 8 Lipo cells more
Price: £20.00 (£23.50 Including VAT at 17.5%)
|  |
|
 |
Medusa 2amp 6volt BEC Ref: 1927 Medusa Research's Battery Eliminator Circuits eliminate the need for a separate battery pack to run the receiver and servos by stepping down the voltage of the main battery. Output to Servos 6.0 volt : for optimum power and speed. please ensure your onboard radio gear is suitable for this voltageW: 20mm, L: 22mm, T: 10mmWeight only 10gmsIdeally suited to power upto 5 servos having a constant current rating of 2Amps with a peak rating of 2.4 Amps.Takes input from 5V to 35Volts max hence suited for 6 to 25 nicad /Nimh cells or 2 to 8 Lipo cells more
Price: £20.00 (£23.50 Including VAT at 17.5%)
|  |
|
 |
Micro Heli Pitch Gauge Ref: 976 Micro Heli Pitch GuageIdeal for T Rex and ZoomPitch gauge:+12/-12Dimensions:length137.3mm,width48mmWeight:26g
Price: £9.35 (£10.99 Including VAT at 17.5%)
|  |
|
 |
Micro Heli pitch Gauge with level Ref: 5 Comes with integrated bubble level for more acurate settings.
Price: £7.61 (£8.94 Including VAT at 17.5%)
|  |
|
 |
Pinion Gear Puller std Ref: 818 Pinion Gear Puller stdIdeal tool to remove pinion gears from brushed and brushless electric motors without damageFor motor shaft dia's 2.0>3.2mm
Price: £9.47 (£11.13 Including VAT at 17.5%)
|  |
|
 |
Pinion Gear Puller micro Ref: 817 Pinion Gear PullerIdeal tool to remove pinion gears from brushed and brushless electric motors without damageFor motor shaft dia's 1.0>2.2mm
Price: £7.82 (£9.19 Including VAT at 17.5%)
|  |
|
 |
Watts Up by Modelavionics Ref: 977 Watt Meter and Power Analyzer for Electric Flight.Can be used on or off the model.Measures:-Volts and amps- constantly updating.Watt Hrs. - total energy used during the flight.Peak Watts - max power delivered during the flight.Invaluable diagnostic aid for all electric flight.Can also be used to accurately measure the charge capacity and energy capacity of your packs. more
Price: £42.50 (£49.94 Including VAT at 17.5%)
|  |
|
 |
Hyper BEC Ref: 978 Technical Specifications: HyperBEC 555 Dimensions: 34 x 28 x 16 mm, Weight: 15 gm approx. Battery: 6--12 cells (series) NiCd/NiMH or 2--4 cells (series) LiIon/LiPo, Any number of parallel cells. Nominal Output Voltage: 5.5 Volts Output Current: 5 Amp continuous, 7 Amp peak Low-battery Performance: 4.5 V out for 5.0 V in at 5 Amp. Overcurrent Protection: Current-limited output (appx 7.5A) Input Protection: Reverse and overvoltage protected Thermal Protection: Automatic switch-off on overheat Approvals: Meets relevant CE specifications more
Price: £16.98 (£19.95 Including VAT at 17.5%)
|  |
|
 |
HV Hyper BEC 555 Ref: 979 Technical Specifications: HyperBEC 555HV Dimensions: 34 x 53 x 16 mm, Weight: 26 gm approx. Battery: 6--20 cells (series) NiCd/NiMHor 2--7 cells (series) LiIon/LiPo Any number of parallel cells.Nominal Output Voltage: 5.5 Volts Output Current: 5 Amp continuous, 7 Amp peak Low-battery Performance: 4.5 V out for 5.0 V in at 5 Amp. Overcurrent Protection: Current-limited output (appx 7.5A) Input Protection: Reverse and overvoltage protected Thermal Protection: Automatic switch-off on overheat Approvals: Meets relevant CE specifications
Price: £18.68 (£21.95 Including VAT at 17.5%)
|  |
|
 |
Li-Po Battery Management Unit 234 Ref: 539 Thinking of using Lithium Batteries?The Lithimon 234 is a sophisticated battery monitor which helps prevent over-discharging of the battery and consequent battery damage. Three ultra-bright LEDs, visible at a distance even in daylight, show the battery status, and an 85 decibel audible 'Land Now!' alarm activates when the battery reaches its limit. The battery monitor can be configured for 2, 3 or 4 cells (7.2, 10.8 or 14.4 Volts) and has three selectable discharge responses for moderate, heavy or very heavy current drain applications. An on-board microprocessor uses a sophisticated measurement technique (10-bit ADC with 64 x oversampling) to obtain an accurate, stable battery level measurement --- despite the peaks and surges from the ESC and motors, which would defeat a simple voltage monitor. Lithimon 234 can pay for itself many times over by preventing damaged batteries and by allowing Lithium batteries to be used to their full capacity without the ravages of the Peak Pulse Effect. more
Price: £15.28 (£17.95 Including VAT at 17.5%)
|  |
|
 |
Li-Po Battery Management - 5678 High Voltage Ref: 607
Price: £16.98 (£19.95 Including VAT at 17.5%)
|
|
Lithimon 5678Similar specification to the 234 but for higher voltage packs 5,6,7,or 8cells - 18, 21.6, 25.2 or 28.8 volts more info
|
 |
Li-Po Battery Management - 9012 High Voltage Ref: 602
Price: £16.98 (£19.95 Including VAT at 17.5%)
|
|
Lithimon 9012Same spcification as the 234 but for higher voltage packs 9,10,11,or12 S 32.4v > 43.2v
|
 |
Spartan G4 Li-Po Guard Ref: 981 The LipoGuard G4 is an advanced battery warning device.which will provide a simple and clear visual indication in all weather conditions, and can be easily seen on the brightest of days more info
Price: £29.74 (£34.94 Including VAT at 17.5%)
|  |
|
 |
4mm gold Connectors 10 pairs Ref: 980
Price: £12.72 (£14.95 Including VAT at 17.5%)
|
|
High Quality 4mm Gold ConnectorsThese connectors are able to withstand up to 70amps with low contact resistance.
|