| | |
Three Dee RIGID Package - PRE ORDER Next Batch Ref: 3891
The Rigid is the first 1.6 meter class production helicopter which is only delivered with a Rigid main rotor for flybarless flying. In my opinion the flybar will not be used any more in future. Due to the technological progress the rise of the electric helicopter in all sizes cannot be prevented any more either. The advantages prevail concerning nearly all points, so that the further development is more or less predictable.Because of the apparent demand for flybarless electric helicopters the development of a light system without any compromises was the consequent step to apply new standards and to get a compact model especially being adjusted to the 3 axis stabilisation, which perfectly supports the completely new possibilities. COMPLETE WITH Kontronik Pyro 700-52, Kontronik Jive 80HV+ And Mini V-barIN STOCK
|  |
|
 |
HEP3GF02 : Align 3G USB Cable Ref: 3889
3G USB link cable incorporates a PC configuration GUI (graphical user interface) and the latest 3G firmware update (V2.1) to improve system stability, and added pirouette compensation to stabilize center point during pirouettes. This unit also allows full programmability of all the features of the 3G System from the PC
OUT OF STOCK In stock
Price: £20.42 (£23.99 Including VAT at 17.5%)
|  |
|
|
OS.91HZ-R Ringed Helicopter Engine Ref: 3890
OS.91HZ-R Ringed Helicopter EngineBased on the multi-time FAI world champion 91HZ heli engines, O.S. is taking their new 91HZ-R to even higher levels of performance; thanks to the new "on demand" regulator system. Designed specifically for this engine, this system guarantees the steady fuel supply, needed for the most-demanding of 3D flights with constant, vigorous attitude and throttle changes. The 91HZ-R also performs well as an F3C powerhouse providing a steady, smooth run and exacting mixture controls.
Price: £280.84 (£329.99 Including VAT at 17.5%)
|  |
|
|
YS 91 SRS Ref: 3882
New even more powerful 90 size heli motor from YS, Featuring a brand new crankcase design, new cylinder head design, new cylinder liner & piston design & new crankshaft the overal effect is a huge power increase while still keeping the same mounting patterns as a standard YS 91SR! it really is simply the best! Hatori have been working closely with Mr Yamada in Japan to make sure the Hatori systems in combination with YS brings the best punch of power possible thats why we ,Hatori & YS recommend the Hatori 946 pipe for use with this new YS91-SRS heli motor!
Price: £255.31 (£299.99 Including VAT at 17.5%)
|  |
|
|
Gaui Hurricane 425 -- 500 Class Heli Ref: 3876
Overall length: 900mm (including cabin & canopy) Main rotor diameter: 965mm Main blade length: 425mm Tail rotor diameter: 217mm Flybar paddle: 78*42*6mm Tail blade length: 75mm Overall height: 310 mm Overall width: 80 mm Total weight: 1450g (Equipped with Blades and all electronic gears except Battery). Main rotor blades: 425mm Carbon Blades Flying duration: 5~6 minutes with 22.2v/2200mah Li-Po battery packs
Price: £51.06 (£60.00 Including VAT at 17.5%)
|  |
|
|
KX018E02T : T-REX 700E 3G FLYBARLESS COMBO + ALIGN 700M MOTOR Ref: 3816
Align T-Rex 700 Electric Combo with 3G Flybarless System & Head, 3 x DS610 Servos, 1x DS650 Servo, 690D Carbon Main Blades.
OUT OF STOCK In stock
Price: £791.48 (£929.99 Including VAT at 17.5%)
|  |
|
|
AV920001 : Avant Aurora 90 Electric RC Helicopter Kit (PRE-ORDER) Ref: 3819
Very limited Number available on first release -- Be quick to preorderThe Absolute Best and Sexiest 3D machine ever is now Electric too! This is a helicopter that was designed from the ground up as a pure native electric heli. With the design of the Aurora Ultimate Avant re-defined the design of advanced 3D RC helicopters and now with the electric Aurora Avant is redefining what a 90-sized electric helicopter should be. This is the dream machine that sets the pace of what an electric 90 should be. Designed from the ground up as a true native electric helicopter with input from many seasoned 90 size electric pilots that were looking for the ideal 90 sized electric machine. The flying characteristics are simply unparalleled. It flies light and nimble yet with the precision of a contest machine.(PRE-ORDERS WILL NOT BE CHARGED UNTIL DAY OF DESPATCH)
Price: £553.18 (£649.99 Including VAT at 17.5%)
|  |
|
|
KX018E03T : T-REX 700E + ALIGN 700M BRUSHLESS MOTOR (PRE-ORDER) Ref: 3817
Upcoming Align T-Rex 700 Electric 90 Sized Helicopter. This includes the new Align 700M Brushless Motor. No Charge's are made until ready to ship.
Price: £544.67 (£639.99 Including VAT at 17.5%)
|  |
|
|
KX021002T : T-REX 550E 3G Combo w/Motor, 4 Servos, 3G Flybarless (IN STOCK) Ref: 3818
New 3G Flybarless Combo featuring the new Align T-Rex 550E, this is almost a 30 class helicopter using rotorblades of 520mm in length. This includes a new 600M Brushless Motor, 70A ESC, 3G Flybarless system, 3x DS610 Servos, DS620 Servo, Carbon Main & Tail Blades
Price: £629.78 (£739.99 Including VAT at 17.5%)
|  |
|
|
YS 91SR Heli Motor: Ref: 3809
The 91 SR is the new version in helicopter engine technology from YSFEATURES:•New Stroke design for superior operation and more power•New carburetor design for easier adjustment•Factory preset fuel regulator•New rear bearing for longevity•Balanced crankshaft for a smoother run•Pressurized and regulated fuel injection system•Same physical size as 61ST-2, 80ST, 91ST making it easy to add more power to your helicopter
Price: £221.24 (£259.96 Including VAT at 17.5%)
| .jpg) |
|
|
YS 56SR Heli Motor: Ref: 3810
The YS 56SR Heli Engine features the patented YS regulated fuel system for positive fuel flow during all types of flight conditions. The pressurized fuel system makes throttle response superior and is unaffected by tank level. YS 56 SR brings you even higher performance to flying in 50 class helicopter than ever before.INCLUDES:•YS56 SR Engine•Check Valve•Needle Valve•Instruction ManualSPECS:Displacement: 9.14ccBore: 23.00 mmStroke: 22.00 mmWeight: 406g
Price: £187.20 (£219.96 Including VAT at 17.5%)
| .jpg) |
|
|
X-Treme 50 G10 -Belt Version Ref: 3806
The RJX X-treme is the latest evolution in radio controlled helicopters. Designed specifically to handle the X-treme pressures of the latest crack 3D style of flying.Features include:* Complete CNC Machined Helicopter Excluding Tail Grips. No Cast parts!* 2 Piece slim frame Design.* CCPM Controls Push/ Pull* Fully Programable Head offers 256 combinations to tune in to your flying style.* 4mm Flybar* Open style CNC metal tail case allowing easy maintenance.* Tailblade grips feature Radial bearings.* Carbon Fiber Tail push rod/ CF boom supports.* Front mounted Tail servo/ correct CG.* Features very low parts count.* Carbon Fiber / G-10 Frames.* 85T CNC nylon main gear* Cheap spare parts and running costs.Now includes F.O.C Update kit
Price: £340.42 (£399.99 Including VAT at 17.5%)
|  |
|
|
X-Treme 50 Silver Carbon -Belt Version Ref: 3807
The RJX X-treme is the latest evolution in radio controlled helicopters. Designed specifically to handle the X-treme pressures of the latest crack 3D style of flying.Features include:* Complete CNC Machined Helicopter Excluding Tail Grips. No Cast parts!* 2 Piece slim frame Design.* CCPM Controls Push/ Pull* Fully Programable Head offers 256 combinations to tune in to your flying style.* 4mm Flybar* Open style CNC metal tail case allowing easy maintenance.* Tailblade grips feature Radial bearings.* Carbon Fiber Tail push rod/ CF boom supports.* Front mounted Tail servo/ correct CG.* Features very low parts count.* Carbon Fiber Frames.* 85T CNC nylon main gear* Cheap spare parts and running costs.Now includes F.O.C Update kit
Price: £357.44 (£419.99 Including VAT at 17.5%)
| |
|
|
GAUI Hurricane 255 Ref: 3804
The new Gaui Hurricane 255 has arrived in the UK, and is now available from stock. Gaui changed the rule book when they dropped their first bomb and produced the famous Gaui Hurricane 200 models. This caused other more established manufacturers to chase them and try to "catch-up" with the new size model that has proved to be so popular. Now they have done it again! The all new Gaui 255 adds another size class to the model helicopter world that is just perfect for flying at the indoor clubs with its 255mm main blades. The Gaui 255 has a very neat appearance and shares the same high qaulity production that is so well respected on the 200 model - but it is just that little bit bigger, but not so large as a 450 size model. Its probably just the "right" size we have all been waiting for, and does not eat up so much space when flying indoors as the more traditional 450 models. The Gaui Hurricane 255 model comes fully assembled with black carbon fibre frame, cnc cut polished alloy components, air-brushed canopy, speed controller and fitted brushless motor. Included are a pair of fitted 255mm carbon fibre main blades, red Gaui retainer straps for the battery and a really neat clutch type scewdriver complete with a double ended tool. We already have all of the spare parts in stock for this new model (including painted replacement canopies) to support our UK customers, so you can get on with the flying and not worry about spares or support if you need them.
Price: £191.50 (£225.01 Including VAT at 17.5%)
|  |
|
|
Hurricane 200V2 SX (with 5600kv Motor, 18A ESC & Gold Plated Connectors) Ref: 3805
The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class). Partial assembled modulate parts which is easy for completion. Partial assembled kit comes with BL motor and 18A ESC. Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears. New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control. New Auto-rotation Main Gear Set with One Way Bearing (Belt driven). New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash. New CNC Rotor Head and Stop Plate. New CNC Mast Mount. New CNC Integrated Tail Boom Clamp and Middle Mount. New CNC Motor Mount comes with 2 motor mounts (Front or Rear). New GF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo). New Fin and Tail(Type E). New light-weight fiber glass painted canopy. High Performance Stabilizer Blades and 42mm Tail Rotor Blades. Kit comes with additional longer flybar produces quick response to 3D maneuver. High Rigidity Landing Gear Brace. The swash plate and the rotor head system equipped with all Precision CNC anodized aluminum. Fully equipped ball bearings.(33 pieces of micro bearings) Seesaw head with bell-hiller system. CCPM collective pitch mechanism (variable pitch
Price: £170.20 (£199.99 Including VAT at 17.5%)
|  |
|
|
SYNERGY-N5 KIT: Synergy N5 Helicopter Kit (PRE-ORDER) Ref: 3803
Pre-Order Now. The soon to be released Synergy N5.Features:120 degree push/pull control system with single axis bell crank shaftMain Gear Ratio 8.5:1Tail Gear Ratio 4.66:1Main Rotor Diameter: 1355mm (with 600mm main blades, will accept 620mm blades)Tail Rotor: 245mmProgrammable Rotor Head will suit pilots from beginner to competition Collective Pitch Range +/-14.5 DegreesPinch style CNC fan hub for easy 'no dial' installationTail hub designed with dual radial and thrust bearing on each tail blade grip10mm hollow main shaft / 8mm solid head axle425cc (14.5 ounce) Fuel TankDesigned with ease of maintenance and setup in mindModular servo and radio trays allow for very clean radio installationSame sleek styling as the N9, just smaller Guide Price £450.00 To be confirmed.
|  |
|
|
KX017012 : Trex 500 ESP 3G Combo (Includes Servo's) Ref: 3802
Features1.Electric power system.2.Simple and light weight design provides awesome flight performance and extreme 3D capability. 3.Rigid carbon fiber frame design.4.Beautiful factory painted fiberglass canopy. 5.Rotor head/tail with thrust bearings.6.Direct-to-swash CCPM linkage.7.Center of gravity of Battery tray designed close to the rotor head.8.High efficiency torque tube drive system.9.Fully driven tail auto rotation system.10.Tail servo boom mount.
Price: £582.97 (£684.99 Including VAT at 17.5%)
| .jpg) |
|
|
Three Point Swash Level - Trex450 FMP1240 Ref: 3800
Three point swashplate leveling tools for Trex450 helicopters!!Each 3 point swashplate level is CNC machined. machinery. Close tolerence requirements ensure the most accuracy possible.
Price: £18.15 (£21.33 Including VAT at 17.5%)
|  |
|
|
Three Point Swash Level - Trex 500 FMP1239 Ref: 3799
Three point swashplate leveling tools for Trex500 helicopters!!Each 3 point swashplate level is CNC machined. machinery. Close tolerence requirements ensure the most accuracy possible.Makes a great companion tool to use with our bubble level swashplate tools.For Trex600 use FMP1232 For Trex700 use FMP1233
Price: £18.15 (£21.33 Including VAT at 17.5%)
| |
|
|
Blade SR RTF Micro Heli Package Ref: 3765
If you’re ready to step up from a coaxial or single-rotor fixed-pitch heli, the Blade SR is the absolute best way to make that transition a successful one. It comes out of the box programmed to provide softer climb, pitch and roll response around the center of stick movement. This, combined with the tough, two-piece main frame and lower head speed, makes the Blade SR more forgiving and easier to master than most conventional CP helis. Plus, it’s big enough to fly outdoors even if there’s a little wind
Price: £148.93 (£174.99 Including VAT at 17.5%)
|  |
|
|
KX0160NPNT : T-REX 600N 3G COMBO Ref: 3724
This is the T Rex 600 Nitro kit from Align with a flybarless head and programmable flybarless system as standard.T-REX 600N 3G kits set X1 3G Programmable Flybarless System X1600D Carbon fiber blade X1DS610 Digital servo X3DS620 Digital servo X12 In 1 voltage regulator combo X1RCE-G600 Governor X1
Price: £629.78 (£739.99 Including VAT at 17.5%)
|  |
|
|
KX018008T : T-REX 700N 3G COMBO Ref: 3723
This is the T Rex 700 Nitro kit from Align with a flybarless head and programmable flybarless system as standard.T-REX 700 Nitro 3G Kits Set X1 3G Programmable Flybarless System X1 set690D Carbon fiber blades X12 In 1 Voltage regulator combo X1 setDS610 Digital servoX3 setDS650 Digital servo X1 GP750 Head lock combo X1RCE-G600 Governor X1
Price: £791.48 (£929.99 Including VAT at 17.5%)
|  |
|
|
H25103T : Align T-Rex 250 3G Programmable Flybarless System Ref: 3727
This is the new eagerly awaited official Flybarless conversion for the T-Rex 250. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 250 to a fully flybarless helicopter
Price: £204.25 (£239.99 Including VAT at 17.5%)
|  |
|
|
H45109T : Align T-Rex 450 3G Programmable Flybarless System Ref: 3726
This is the new eagerly awaited official Flybarless conversion for the T-Rex 450. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 450 to a fully flybarless helicopter.
Price: £208.50 (£244.99 Including VAT at 17.5%)
|  |
|
|
H45110T : Align T-Rex 450 PRO 3G Programmable Flybarless System Ref: 3725
This is the new eagerly awaited official Flybarless conversion for the T-Rex 450 PRO. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 450 PRO to a fully flybarless helicopter. This conversion can also be used with the T-Rex 450 Sport/SE/SEV2
Price: £212.76 (£249.99 Including VAT at 17.5%)
|  |
|
|
HN7093T : Align 3G Flybarless Conversion (T-Rex 700) Ref: 3695
This is the new eagerly awaited official Flybarless conversion for the T-Rex 700. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 700 to a fully flybarless helicopter. Release date is to be confirmed but is not expected to be too far away. Price is also subject to change, but we expect this will be correct, if there is any change it will be confirmed prior to shipping. You will not be charged until the day of despatch a pre-order will guarantee your place in the queue for what is expected to be very popular.
Price: £280.84 (£329.99 Including VAT at 17.5%)
|  |
Colour
|
|
|
HN6110 : Align 3G Flybarless Conversion (T-Rex 600) Ref: 3694
This is the new eagerly awaited official Flybarless conversion for the T-Rex 600. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 600 to a fully flybarless helicopter. Release date is to be confirmed but is not expected to be too far away. Price is also subject to change, but we expect this will be correct, if there is any change it will be confirmed prior to shipping. You will not be charged until the day of despatch a pre-order will guarantee your place in the queue for what is expected to be very popular.
Price: £242.54 (£284.98 Including VAT at 17.5%)
|  |
Colour
|
|
|
H50123T : Align 3G Flybarless Conversion (T-Rex 500) Ref: 3693
This is the new eagerly awaited official Flybarless conversion for the T-Rex 500. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 500 to a fully flybarless helicopter. Release date is to be confirmed but is not expected to be too far away. Price is also subject to change, but we expect this will be correct, if there is any change it will be confirmed prior to shipping. You will not be charged until the day of despatch a pre-order will guarantee your place in the queue for what is expected to be very popular.
Price: £234.03 (£274.99 Including VAT at 17.5%)
|  |
|
|
Spartan Quark - MEMS AVCS Gyro Black plastic case Ref: 3691
Whether you are an ambitious beginner, a 3D Pro or simply love gadgets the Spartan Quark is the ultimate gyro choice for you. Its easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Do you love heart pounding 3D? We do; and we designed the Quark to deliver just that! The Quark is a high specification model helicopter gyro capable of delivering exceptionally consistent yaw rates even at eye-blurring speeds of over two full turns per second. The control is smooth and precise with a very solid feel and impressive holding power. The stopping characteristics give a nice soft, but precise response with no bounce back.Backed up with Spartan RC's industry-leading warranty and including 3 years free repair service and 50% RRP discounted crash replacements the Quark offers market leading performance, exceptional value and reassurance.
Price: £70.00 (£82.25 Including VAT at 17.5%)
|  |
|
|
Spartan Quark - MEMS AVCS Gyro Gold metal case Ref: 3692
Whether you are an ambitious beginner, a 3D Pro or simply love gadgets the Spartan Quark is the ultimate gyro choice for you. Its easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Do you love heart pounding 3D? We do; and we designed the Quark to deliver just that! The Quark is a high specification model helicopter gyro capable of delivering exceptionally consistent yaw rates even at eye-blurring speeds of over two full turns per second. The control is smooth and precise with a very solid feel and impressive holding power. The stopping characteristics give a nice soft, but precise response with no bounce back.Backed up with Spartan RC's industry-leading warranty and including 3 years free repair service and 50% RRP discounted crash replacements the Quark offers market leading performance, exceptional value and reassurance.
Price: £82.17 (£96.55 Including VAT at 17.5%)
|  |
|
|
Spartan G3 Voltguard Ref: 982
Voltguard G3 is more than a simple battery checker; it is an innovative indispensable product for the RC model user. Although compact in size, G3 utilises the latest micro-controller technology to achieve precision voltage measurements via digital signal processing techniques and offers fully configurable operation for a variety of battery technologies.
more info
Price: £16.98 (£19.95 Including VAT at 17.5%)
|  |
|
|
Spartan G4 Li-Po Guard Ref: 981
The LipoGuard G4 is an advanced battery warning device.which will provide a simple and clear visual indication in all weather conditions, and can be easily seen on the brightest of days
more info
Price: £29.74 (£34.94 Including VAT at 17.5%)
|  |
|
|
Align Super Starter for Helicopter STQ-100 Ref: 3696
HFSSTQ01 : Align Super Starter for Helicopter STQ-100 (YELLOW)High Powered Geared Starter designed for use with any size engine from 30-90 Size Glow or upto 50cc. This includes a no-load hex starter extension that contains a double one-way bearing for increased durability. All of this is packaged in a very neat plastic case to keep it safe. There is space for an optional Aeroplane spinner attachment
Price: £66.95 (£78.67 Including VAT at 17.5%)
|  |
Colour Preference
|
|
|
Blade mCX Tandem Rescue Ref: 3690
The Blade mCX Tandem Rescue is an entirely new easy to fly helicopter based on the super-stable Blade mCX platform, and despite it having four rotors it’s just as easy to fly as the standard mCX. It comes out of the box with a realistic looking rescue helicopter body, an authentic Canadian colour scheme and working LED navigation lights. Designed to be the smallest tandem helicopter with full 4-channel proportional control, you can be up and hovering like a professional on your very first flight even if you’ve never touched an RC transmitter before.Weighing in at a mere two ounces, the Blade mCX Tandem Rescue is equipped with 4 micro coreless motors that provide more than enough power for precise hovering and forward or backward flight whilst the twin contra-rotating co- axial rotor heads provide outstanding flight stability.Additionally, it features a 5-1 electronic control unit with a Spektrum 2.4GHz DSM receiver, main motor ESC’s, a mixer gyro and fully proportional servos, helping pilots enjoy maximum control with the included MLP4DSM 4-channel transmitter. The perfect choice for beginners, the Tandem Rescue Helicopter not only looks and flies great, it comes with factory-installed LED navigation lights allowing you to fly in the dark or outside after dark when winds are calm
Price: £99.57 (£116.99 Including VAT at 17.5%)
|  |
|
|
566 55 size 3d muffler ( Suits OS55 and TT53 Redline) Ref: 1
566 56NS-3D Front Head For 53-56 EnginesThunder Tiger RL-53HOS55HZYS56 Muffler Weight 149g
Price: £60.86 (£71.51 Including VAT at 17.5%)
|  |
|
|
Phoenixtech TT360 Super Combo Ref: 3688
The new Phoenixtech TT 325-360 electric helicopter designed by Phoenixtechall metal head and tail,carbon fiber u-frame design , tube driven tail, can run either 325mm or 360mm main blades, 3 Cell or 4 Cell lipo battery in its stock form.Fitted with a 4 Cell lipo, 360mm blades with phoenixtech 2221-10 motor, the TT360 helicopter will fly like a 500size helicopter, even when it’s windy.Power SystemMotor: Phoenixtech/Scorpion 2221-10 Outrunner Brushless Motor.ESC : Phoenixtech Gold Line 45ACyclic Servo: 3 Phoenixtech DS401MTail Servo: 1 Phoenixtech DS502CGyro: 1 Phoenixtech GT90 heading hold gyro360mm carbon blades
Model Helicopter World Review Dec09
Price: £340.42 (£399.99 Including VAT at 17.5%)
|  |
|
|
Flasher 250 ARTF Ref: 3683
TREX 250 Compatible 3d heliWith CSM420e Gyro and Digital Tail ServoKit Includes:Fully built airframe with bladesMotor and ESCGyro and ServosBattery and ChargerSupplied pre-assembled in an aluminium case
Price: £187.23 (£220.00 Including VAT at 17.5%)
|  |
|
|
Flasher 250 RTF Ref: 3684
AS ABove But With 2.4 Ghz Transmitter and RecieverComplete Just Charge And FLY!
Price: £229.78 (£269.99 Including VAT at 17.5%)
|  |
|
|
Trex700 Limited Edition Ref: 1482
KX018005T : T-REX 700 Nitro Limited Edition Available with Silver Or Black HeadFeatures1.Simple and light weight design provides awesome flight performance.2.+-13°collective pitch is possible for extreme 3D performance.3.Heavy duty tail with thrust bearings.4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.6.Battery tray designed for easy and clean radio gear installation.7.Fuel Tank Capacity 630cc.8.Heavy duty tail with thrust bearings.9.Torque Tube driven tail for incredible 90 sized performance.10.Rigid frame design that can also handle hard crashes without damage.11.Super engine cooling system very efficient airflow to provide unequaled cooling and horsepower.12.New main gear with one-way bearing design for high torque.
Price: £604.00 (£709.70 Including VAT at 17.5%)
|  |
|
|
KX0160NPTL : T-Rex 600N LIMITED EDITION Ref: 3687
This is the latest design from the well established Align range. It has once again been designed & developed by Jason Krause and Alan Szabo Jr so it is sure to be a winner! Specification is very high with a high use of alloy & carbon fibre throughout. This new limited edition version has all the metal parts anodized in silver finish. Included in kit:T-REX 600 Nitro kits set X 1 set600D Carbon fiber blade X DS610 Digital servo X 3GP750 + DS620 Head lock gyro combo X 12 In 1 voltage regulator comboX1RCE-G600 Governor X 1
Price: £451.06 (£530.00 Including VAT at 17.5%)
|  |
|
|
V bar 4010 Ref: 3173
Digital rotor heads are here: With the Virtual Flybar System (“V-Bar”)LATEST VERSION With Satellite Rx inputs
Price: £295.61 (£347.34 Including VAT at 17.5%)
|  |
|
|
Blade MSR micro heli BNF Ref: 3682
Fun. Fast. Agile. The “next step” ultra-micro heli for coaxial pilots.The Blade mSR is a single rotor, ultra-micro helicopter weighing in at less than one ounce ready to fly. Completely factory assembled and flight tested you can be in the air with this agile heli in the time it takes to charge the first battery.And once that flight is over because the included charger can handle four batteries, and the heli is supplied with two, you can just carry on flying!Designed from the ground up and building on the earlier success of the Blade mCX and mCX S300, this great little heli really takes the ultra-micro concept to the next level. With a compact 180mm rotor span, the mSR provides pilots with an awesome level of performance and excitement with its increased agility and speed over co-axial micros. A unique rotor head design provides the same inherent stability of traditional co-axial (twin-rotor) helicopters, but thanks to a fixed-pitch bell-hiller design the mSR can deliver a much more responsive and spirited performance. The kind of performance that would normally only be associated with larger single-rotor models.Complete with 2 batteries and 4 port mains/Drycell charger
Price: £78.25 (£91.94 Including VAT at 17.5%)
|  |
|
|
Flasher 450 CF Ref: 1473
ARTF 450SE Heli - Just add Tx & RxCarbon frames & aluminium HeadIncludes 3s Lipo Battery and chargerFull Parts support - Includes Carry Case
Price: £226.09 (£265.66 Including VAT at 17.5%)
|  |
|
|
OS Max 55HZ Hyper Ref: 1481
The max 50SX-H Hyper has established an enviable reputation for power, reliability and ease of use. The Max 55HZ Hyper moves that to a whole new level!Designed primarily with the demands of the 3D pilot in mind, the 55HZ Hyper delivers 61 size performance in a 46 size crankcase. That power comes from the extensive experience that OS has gained over many years and working extensively with the worlds top pilots to refine all aspects of the engine without compromise in any area.By using the same mounting layout, you can drop a 55HZ into any model that previously suited the 50SX-H without modification. Just the area around the new carburettor is a little bigger and may require adjustmenst to the cooling shroud.This entirely new engine shares almost nothing with the 50SX-H and has some new features not seen on an engine of this size before. The rear bearing is now designed to resist corrosion, the new 40L carburettor has three adjustments to cater for idle, mid range and full power. Until now, these features were the domain of 61 class engines or bigger. The throttle arm has four leaves so that push pull control is easy from any direction. The heatsink head is bigger for improved cooling as well.
Price: £182.50 (£214.44 Including VAT at 17.5%)
|  |
|
|
RotorWorld Issue 43 Ref: 1479
Latest RotorWorld Magazine issue 43 -- November 09
Price: £4.50
| |
|
|
Throttle Max Ref: 1478
Built on the Award winning success of the Throttle Jockey Pro and the Throttle Jockey RevMax.New features include: New unit now includes both the TJPro and the TJ RevMax. Simply select whether you want to govern or limit while in the calibration mode. Although super servo mode for the TJPro is no longer supported, we still recommend a fast Digital servo to yield the best performance. Fully Compatible with all 2.4Ghz systems and conversion modules. Also compatible with the latest high speed receivers.(Manual calibration is NO Longer supported. Must use at least a 7 channel radio.) Contains new software for future Model Avionics products. Comes complete with sensor, 2 magnets, 2 leads, 30 and 50/60 size brackets and all hardware.
Price: £56.48 (£66.36 Including VAT at 17.5%)
|  |
|
|
Blade MSR micro heli Ref: 1477
Fun. Fast. Agile. The “next step” ultra-micro heli for coaxial pilots.The Blade mSR is a single rotor, ultra-micro helicopter weighing in at less than one ounce ready to fly. Completely factory assembled and flight tested you can be in the air with this agile heli in the time it takes to charge the first battery.And once that flight is over because the included charger can handle four batteries, and the heli is supplied with two, you can just carry on flying!Designed from the ground up and building on the earlier success of the Blade mCX and mCX S300, this great little heli really takes the ultra-micro concept to the next level. With a compact 180mm rotor span, the mSR provides pilots with an awesome level of performance and excitement with its increased agility and speed over co-axial micros. A unique rotor head design provides the same inherent stability of traditional co-axial (twin-rotor) helicopters, but thanks to a fixed-pitch bell-hiller design the mSR can deliver a much more responsive and spirited performance. The kind of performance that would normally only be associated with larger single-rotor models.Complete with 2 batteries and 4 port mains/Drycell charger
Price: £100.00 (£117.50 Including VAT at 17.5%)
| |
|
|
HS7950TH 7.4v (2s) High Voltage ULTRA Torque Servo Ref: 1475
Hitec’s strongest servo period, the "Ultra Torque" HS-7950TH is designed to operate on a two cell LiPo Pack. Featuring our high resolution "G2" second generation programmable digital circuit and our indestructible Titanium gears, The HS-7950TH has the performance and durability you’ve come to expect from a Hitec servo. Other features in the HS-7050TH include a 7.4v optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing. The HS-7950TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 403oz./in. of torque at 6.0 volts, while still maintaining a respectable 0.15 second transit time
Price: £78.25 (£91.94 Including VAT at 17.5%)
|  |
|
|
HS7940TH 7.4v (2s) High Voltage ULTRA Speed Servo Ref: 1476
Hitec’s fastest standard size servo the "Ultra Speed" HS-7940TH is designed to operate on a two cell LiPo Pack. Featuring our high resolution "G2" second generation programmable digital circuit and our indestructible Titanium gears, The HS-7940TH has the performance and durability you’ve come to expect from a Hitec servo. Other features in the HS-7040TH include a 7.4v optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing.The HS-7940TH has been designed for applications where speed and response is demanded. Perfect for High Performance Nitro and Electric Helicopters, Aircraft, Cars, and Trucks. Featuring a blistering transit time of .07sec but still maintaining a respectable 183 in/oz of torque at 6.0 volts.
Price: £78.25 (£91.94 Including VAT at 17.5%)
| |
|
|
Flasher 500 ARTF Ref: 1474
500 size ARTFJust add Tx & RxFull parts support and compatible with othersCarry case, Battery and charger included
Price: £340.42 (£399.99 Including VAT at 17.5%)
|  |
|
|
Flasher 450 CF Ref: 1473
ARTF 450SE Heli - Just add Tx & RxCarbon frames & aluminium HeadIncludes 3s Lipo Battery and chargerFull Parts support - Includes Carry Case
Price: £226.09 (£265.66 Including VAT at 17.5%)
| |
|
|
Flasher 450 Pe Ref: 1472
Arft 450 Size Heli -- Just add rx &txIncludes 3s Lipo Battery and chargerFull Parts support - AND CASE!!
Price: £153.18 (£179.99 Including VAT at 17.5%)
|  |
Add Spektrum DX6i Combo
|
|
|
|
Futaba R6106HF 2.4G : 6ch Receiver Ref: 1037
6ch high-speed receiver for parkflight.Recommended application:Parkflight aircraft with wingspan of around 1300mm and electric powered helicopters with a rotor diameter of up to around 1000mm.• Operation mode: FASST 7ch mode• Output Frame Rate(User selectable): 16mS(Normal mode), 8mS(High-Speed mode)• Antenna: 30mm lead wire• Range: around 300m• Working voltage: 3.3 to 8.5V
Price: £50.86 (£59.76 Including VAT at 17.5%)
|  |
|
|
Nano Neon 2.4 Ref: 1241
The NANO NEON,Its beyond micro and into Nano technology.The Nano Neon builds on the pedigree of its family members, the Spirit CX, Neon Blaze V2.4 and the Razor Helicopters. Top quality components throughout with the addition of all the option parts fitted as standard make this Nano size four channel model a class leader.Available in four striking colours, each canopy available separately so you can collect them all.The Nano Neon comse complete with a full size high quality 2.4Ghz transmitter, a spare set of rotor blades, a 400mah Li-Po battery and charger so you can fly to your hearts content.The ultimate office/lounge full function, super stable model helicopter available.The Nano Neon is a small model with GIANT performance!
Price: £78.25 (£91.94 Including VAT at 17.5%)
|  |
|
|
Rockamp Lipo 6S 1P 4400Mah Ref: 1330
High Quality Li-po supplied in metal storage box.30C Guarantee, ROCKAMP guarantees that ACF3 LiPos will sustain 30C continious discharge.Real 3D pilots love to push the limits of physics, skills and material. The only thing that counts for them is Power, Power and more Power. ROCKAMP once again extended its leadership position in lithium polymer technologies by presenting the new Advanced Chemical Formula 3 Series (ACF3). The superior quality and voltage stability of ACF3 batteries provide up to 15% more head speed, giving you the cutting edge in 3D helicopter flight.ROCKAMP Heliperformance ACF3 LiPo Series
Price: £165.21 (£194.12 Including VAT at 17.5%)
|  |
|
|
Mini V-bar Ref: 911
The new Mini VBar is the world’s smallest and lightest 3-axis virtual flybar system. It is designed to fit any small indoor helicopter. Despite its size, the Mini VBar is equipped with top-quality sensors and will thus satisfy the highest performance expectations. Programming is done via a control panel, or via USB using the PC software. A special feature of the Mini VBar is the option to use it in conjunction with one or two 2.4 GHz satellite receivers (you may choose from various brands). This feature renders it unnecessary to use a primary receiver. It is also possible to connect the Mini VBar to a receiver in the conventional way. MiniVBar operates with the following satellite receivers: Spektrum, Jeti, Fasst, IFS
Price: £286.61 (£336.77 Including VAT at 17.5%)
|  |
|
|
KDS 450SV 2.4GHz Complete Ref: 599
The all new KDS 450SV from Century UK, complete with 4 Tower Pro metal geared servos including a metal geared fast tail servo, a 6 channel 2.4GHz transmitter with 5 model memory, 8 channel 2.4GHz receiver and KDS 800 Gyro.With full CNC 120' CCPM head, carbon framesets, 325mm fibreglass blades and a CNC belt driven tail gearbox this model is smooth, efficient and lightweight, weighing in at only 770g with the battery fitted it is ideal for novice through to extreme 3D flight or fitting into a scale fuselage.This model utilises a 3 cell 11.1v 20c 2200mah li-poly battery, along with a 40A brushless ESC and 3500KV brushless outrunner motor to provide more than enough power for most applications and pilots.With everything found here coming as standard including the hand painted fibreglass canopy, lithium polymer balance charger and aluminium carry case.
Price: £313.04 (£367.82 Including VAT at 17.5%)
|  |
|
|
Second Hand Sales Updated Ref: 596
- 29-07-09
|  |
|
|
KX015076 : T-REX 450 Sport Super Combo Ref: 593
Newly designed wider main blade grips that increase the overall main blade disc diameter, resulting in dramatically increased stability and agility.Thicker main blade grip arms to increase durability and crash survivability.Expanded flybar supporting point design on control cage, increasing the rigidity of fly bar, resulting in improved flight stability.High precision bearing mixing arms for smooth and precise operations.Newly designed servo screw retainer to simplify servo installation process.Newly designed frame structure blocks and motor mount to simplify assembly, yet dramatically increase the overall frame rigidity, resulting in improved 3D performance.Improved battery mount for increased battery mounting rigidity, eliminating flight instability caused by movement of battery.Improved gyro mounting platform to avoid degrading locking performance as result of tail boom vibration.Tail boom support rods have been lengthened to suppress tail boom vibrations; integrated ends design improves durability and crash survivability.Tail control arm base is integrated with tail gearbox to improve control precision, and simplify maintenance.Newly designed high rigidity anti-rotation guide for improved operation precision.
Price: £295.64 (£347.38 Including VAT at 17.5%)
|  |
|
|
Trex 250 EONX Lite 800mah 3S Ref: 590
EONX Lite 800mah 3S -- Trex 250 Upgrade lipo jst connector and align balance plug
Price: £21.73 (£25.53 Including VAT at 17.5%)
|  |
|
|
Blade CX/cx2/cx3 800mah 2S EONX Ref: 591
Blade CX/cx2/cx3 800mah 2S EONX Upgrade Lipo
Price: £15.64 (£18.38 Including VAT at 17.5%)
| |
|
|
Bantam e-STATION BC8DP Dual Power Ref: 592
Bantam e-STATION BC8 Dual power Charger/balancer/discharger
Price: £179.99 (£211.49 Including VAT at 17.5%)
| |
|
|
Heli tool Kit in zip case Ref: 581
Rc System High grade 7pc short driver set and 3 Pc Pliers in a zip case4 Hex drivers 1.5,2,2.5,3mm2 Hex socket 5.5,7mm1 Exhaust spring tool3 Pliers ( Nippers/ Ball Link/ Long nose)
Price: £23.47 (£27.58 Including VAT at 17.5%)
|  |
|
|
Thunder Power Pro Lite Rx 3600mah Li-po Ref: 580
3600mAh Rx lipo 2s2p 7.4v
Price: £48.39 (£56.86 Including VAT at 17.5%)
| |
|
|
Intellect 2S 3800mAh 20C Rx Li-Fe Ref: 577
3800 Lithium Rx PackLi-fe 6.6v 2s Pack
Price: £40.86 (£48.01 Including VAT at 17.5%)
|  |
|
|
Intellect 2S 3000mAh 25C Rx Li-Fe Ref: 578
3000 Mah Lithium Rx PackLi-fe 6.6v 2s pack
Price: £34.77 (£40.85 Including VAT at 17.5%)
|  |
|
|
Intellect 2S1P 2200mAh Rx Li-Po Ref: 560
Intellect 2200mAh Rx Li-Po Pack2200mAh 2s 7.4v Rx Pack
Price: £16.51 (£19.40 Including VAT at 17.5%)
|  |
|
|
Intellect 3S1P 2100mAh Tx Li-fe Ref: 579
Intellect 3S1P 2100mAh Tx Li-Fe2100mAh 3s Tx pack 9.9v
Price: £30.43 (£35.76 Including VAT at 17.5%)
|  |
|
|
Fusion LX41B Pro Ethos AC/DC Ref: 573
FeaturesBuilt-in intelligent balancing circuit is designed to individually balance each cell on a lithium battery pack within the tolerance of 5mV during charge. Balancing plug adaptor boards are supplied to suit FlightPower, Thunder Power and JST-XH batteries. Optional adaptors for Polyquest & 4/2mm plug car packs are available. 2 line, 8 character, LCD makes the screen clear and legible. Monitoring features allow the monitoring of capacity, peak voltage and individual cell voltages (Lithium only) on the screen during and after charging. Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output.
Price: £52.16 (£61.29 Including VAT at 17.5%)
|  |
|
|
Fusion LX60B Pro Elysium AC/DC Mains & 12V Supply Ref: 574
FeaturesPack Cycling (Charge to Discharge / Discharge to Charge) 2-Line, 16 character, blue backlit LCD makes the screen extremely clear and legible Built-in intelligent balancing circuit is deesigned to individually belance each cell on the connected lithium battery pack within the tolerance of 5mV during charge or discharge Balancing plug adaptor boards are supplied to suit JST XH, FlightPower and Thunder Power batteries. Optional adaptors for Polyquest are available Voltage monitoring feature shows each actual cell voltage on the screen during balancing Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output Packaged in a rugged aluminium case
Price: £53.61 (£62.99 Including VAT at 17.5%)
|  |
|
|
Fusion L120Pro Paladin DC 12s Charger/Balancer Ref: 575
The Fusion Paladin L120Pro charger is the flagship of the Fusion charger range, with 10A (max 180W) charging power for up to 12 Lithium cells. The Package also includes the Fusion 12 cell balancer (O-FS-B12S) with balance adaptor boards for XH & TP type batteries. FeaturesAutomatic settings for charging and discharging NiCd/NiMH packs 10 user definable intellligent battery memories that enable individual pack parameters to be stored, i.e. battery type, number of cells, battery capacity, charge current and discharge current Pack cycling (charge to discharge / discharge to charge) Cycling repeat 1~5 times with 1~30min delay between cycles (NiCd/NiMH) 2-line, 16 character, blue backlit, LCD makes the screen extremely clear and legible Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output Automatic initial charge stage checks the condition of the battery being charged
Price: £76.59 (£89.99 Including VAT at 17.5%)
|  |
|
|
Fusion PS20 12V Power Supply Ref: 576
FeaturesInput Voltage: 220~240V AC Output Voltage: 13.8V DC Regulated Current Rating: 0~20 Amps Output Connections: 4mm Banana Sockets / ClampsHigh maximum current of 20 Amps Switch mode technology Regulated and very smooth output current The Power Supply can be used with almost all DC chargers on the market
Price: £32.16 (£37.79 Including VAT at 17.5%)
|  |
|
|
Smart Guard Battery Checker Li/Ni Ref: 571
Input Voltage: 10~15V DC Battery Type & Cells: 1~12 Li-Po, Li-Ion, Li-Fe / 1~30 NiCd, NiMH / 1~6 Lead-Acid Battery Capacity: 100mAh ~ 20,000mAh adjustable ONLY for Li-Po, Li-Ion, Li-Fe
Price: £16.16 (£18.99 Including VAT at 17.5%)
|  |
|
|
Batt. Load Tester 4.8/6V NiCd, NiMH Ref: 572
This simple to use Battery Load Tester is designed to connect to the charge lead from the receiver switch, or an external charge socket, to check your models NiCd or NiMH battery condition under a similar load as when it is in the air. 4.8V ~ 500mA / 6.0V ~ 600mA)
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
YEI-SG1 : Curtis Youngblood Sold G Gyro Ref: 570
High performance heading hold gyro for heart pounding 3d maneuvers. Fully optimized for aggressive 3D and Precision flying, feature an amazingly constant pirouette rate and solid straight line hold. Allows for the use of any tail servo, and is a breeze to setup.
Price: £125.21 (£147.12 Including VAT at 17.5%)
|  |
|
|
Kontronik Mini Pyro 20-08 Ref: 321
The MINIPYRO 20-8 is the little brother of the PYRO 30-12.He has also been developed especially for helicopter applications, and it's material configuration follows the same quality philosophy as the PYRO 30-12.With a rotor length of 20 mm a new size was developed to accomodate the performance requirements of modern helicopters. 1,000 W continuous power all ow 3D acrobatic flight at its finest.The MINIPYRO in short: Neodym magnets, heat resisten up to 150 degree C Specialiyed WInding, heat resistent up tp 300 degree C Perfectly balanced Optimized metal sheets Optimized ventilation
Price: £152.17 (£178.80 Including VAT at 17.5%)
|  |
|
|
CSMRL40 : Revlock 40 Governor System -- Advanced G-Sensitive Collective Management. Ref: 82
Now there is no need to compromise your set-up between high-g capability and ultimate climb and flight speeds. RL40 intelligently applies collective management to give you the best of both worlds.Like its predecessor, the RL30, this governor will, when needed, limit the amount of collective pitch available to prevent excessive loss of head-speed in high-g manoeuvres. However, RL40 goes one stage further, and by incorporating an accelerometer is able to recognize low-g flight situations such as fast forward flight and vertical climbs where greater performance can be obtained by allowing more collective pitch to be employed even where this results in some loss of head speed.It also greatly simplifies the set-up and installation by removing the need for careful pitch range adjustment.
Price: £57.38 (£67.42 Including VAT at 17.5%)
|  |
|
|
Muscle Pipe 6 90 - MP6 90 Ref: 34
'Extra Muscle' now from Curtis Youngblood. This is the new MP6 version of the popular 90 Sized Pipe. Suitable for almost all 90 Helicopters, T-Rex 700, Aurora, Vibe 90, Srimok 90 etc.
Price: £78.25 (£91.94 Including VAT at 17.5%)
|  |
|
|
K10457TA : PU Adhesive Gel Ref: 3681
PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
KX015073T : T-REX 450 PRO COMBO Ref: 3680
This Combo is the same as the Super Pro but less the Servos & Gyro. So complete with the helicopter is the Speed Controller & Motor only. Ideal if you have your own electronics you wish to use.
Price: £229.78 (£269.99 Including VAT at 17.5%)
|  |
|
|
JR DSX 9X 2.4ghz combo (NO CHARGER) Ref: 3677
Combo version of the new 2.4ghz JR DSX9x - includes the R921 2.4 DSM2 DuaLink receiver No Charger.2.4GHz RC technology with a flawless track record.
Price: £425.53 (£500.00 Including VAT at 17.5%)
|  |
|
|
JR DSX12 2.4ghx Combo (NO CHARGER) Ref: 3676
Tx/Rx comboDSM/DSM2 compatibleCompatible with all Spektrum and JR DSM brand aircraft receiversR1221 receiver included50-model memoryAdvanced programming with more features for today's complex modelsOne transmitter for all model types, includes programming for Air, Heli, and Sailplane
Price: £1,186.91 (£1,394.62 Including VAT at 17.5%)
|  |
|
|
QUK Swash Plate Logo 600/500 Ref: 3606
Suitable for Logo 600 & 500This superb quality swashplate uses a high quality radial bearing and an aviation grade PTFE lined chrome steel centre swivel ball. Heavy duty M3 threaded stainless steel control balls make it tough enough for the most demanding of flying.The main radial bearing is fitted with pre-load adjusters to eliminate any play and also allows future re-tensioning. Both the inner and out control balls are all aligned with the centre swivel ball and so ensure a pure control geometry.Weight - 46.90 gAvailable in Black or Silver finish.
Price: £42.51 (£49.95 Including VAT at 17.5%)
|  |
|
|
HS1298 : 450SE/SEV2 TUBE DRIVE CONVERSION Ref: 3379
Convert your TRex 450 to tube drive.Use for T-REX 450 S/GF/SE/SEV2. The high efficiency torque tube drive system not only decreases the consumption of the motive power but also increases the fluency and the precision of the rudder.
Price: £51.06 (£60.00 Including VAT at 17.5%)
|  |
|
|
ROCKAMP 6S 1P 2500mah Ref: 3177
High Quality Li-po supplied in metal storage box.30C Guarantee, ROCKAMP guarantees that ACF3 LiPos will sustain 30C continious discharge.Real 3D pilots love to push the limits of physics, skills and material. The only thing that counts for them is Power, Power and more Power. ROCKAMP once again extended its leadership position in lithium polymer technologies by presenting the new Advanced Chemical Formula 3 Series (ACF3). The superior quality and voltage stability of ACF3 batteries provide up to 15% more head speed, giving you the cutting edge in 3D helicopter flight.ROCKAMP Heliperformance ACF3 LiPo Series22.2v, 2500mah. Continuous Dscharge - 75amp. 425g119x39x46mm
Price: £99.99 (£117.49 Including VAT at 17.5%)
| |
|
|
ROCKAMP 3S 1P 11.1V 2200MAH Ref: 3174
High Quality Li-po supplied in metal storage box.30C Guarantee, ROCKAMP guarantees that ACF3 LiPos will sustain 30C continious discharge.Real 3D pilots love to push the limits of physics, skills and material. The only thing that counts for them is Power, Power and more Power. ROCKAMP once again extended its leadership position in lithium polymer technologies by presenting the new Advanced Chemical Formula 3 Series (ACF3). The superior quality and voltage stability of ACF3 batteries provide up to 15% more head speed, giving you the cutting edge in 3D helicopter flight.ROCKAMP Heliperformance ACF3 LiPo Series11.1v, 2200mah. Continuous Discharge 66amp192g101x35x26mm
Price: £43.47 (£51.08 Including VAT at 17.5%)
| |
|
|
T Rex 250 Micro screw Set Ref: 2832
RCZALG007Stainless Steel Screw Kit 130+ piecesRCScrewZ Stainless Screw Kits are 100% complete. Your new kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. Our kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again.
Price: £21.73 (£25.53 Including VAT at 17.5%)
|  |
|
|
Hitec HG-5000 Gyro Plus 5083 digital servo Ref: 2483
Item Description Hitec HG-5000 Gyro Plus 5083 digital servoHitec is proud to announce the HG-5000 micro heading lock gyro with the “extreme speed” HSG-5083MG Digital Micro Tail Rotor servo. The HSG-5083 was built specifically for the HG-5000 to obtain optimum performance in the T-Rex 400-450, Helimax 400-450 or similar class of electric helis and of course the 250 class At 0.35 oz the HG-5000 is very light and small, yet yields performance equal or better than any other Gyro available.
Price: £99.09 (£116.43 Including VAT at 17.5%)
|  |
|
|
P-R6008HS/2-4G : Futaba 8ch Rx R6008 2.4ghz (FS/HS Mode) Ref: 2434
P-R6008HS/2-4G : Futaba 8ch Rx R6008 2.4ghz (FS/HS Mode)Offers 2048 resolution plus FASST benefits including Dual Antenna Diversity and significantly reduced latency for lightning-quick response. High-speed operation takes advantage of digital servos’ ability to update more rapidly than analog servos (both can be used with this receiver) HS (High Speed) mode improves frame rate on channels 1-6 to only 7 milliseconds compared to 14 milliseconds at normal mode.* Note: In HS mode, digital servos (including those in the BLS series) must be used on channels 1-6. Those channels will also operate gyros and brushless ESCs. Channels 7 and 8 continue at normal mode and accept any servos.
Price: £101.73 (£119.53 Including VAT at 17.5%)
|  |
|
|
3s 1p EON X 2200mah Ref: 2370
Item Nr: EONX30-22003S Weight: 195 grams LiPo Voltage: 11.1 V ,LiPo Config: 3S1P , Cont Discharge: 30C 66A, Burst Discharge: 60C 132A LiPo Height: 26 mm, LiPo Length: 107 mm, LiPo Width: 36 mm
Price: £39.09 (£45.93 Including VAT at 17.5%)
|  |
|
|
6s 1p EONX 5000mah Ref: 2436
Item Nr: EONX30-50006S Weight: 814 grams LiPo Voltage: 22.2 V, LiPo Config: 6S1P Cont Discharge: 150A, Burst Discharge: 300A LiPo Height: 57.5 mm, LiPo Length: 157 mm , LiPo Width: 45 mm
Price: £173.87 (£204.30 Including VAT at 17.5%)
| |
|
|
6s 1p EON X 2450MAH Ref: 1657
FLIGHTPOWER EON-X 30C 2450MAH 6S Technical Data: Item Nr: EONX30-24506S Weight: 404 grams LiPo Voltage: 22.2 V , LiPo Config: 6S1P Cont Discharge: 73A, Burst Discharge: 146A LiPo Height: 32 mm, LiPo Length: 135 mm , LiPo Width: 44 mm
Price: £91.26 (£107.23 Including VAT at 17.5%)
| |
|
|
P-R6014HS/2-4G : Futaba 14ch Rx 2.4ghz (FS/HS Mode) Ref: 1462
R6014HS is a new version 2.4Ghz Receiver from Futaba. It could be operated in Normal Mode or High Speed mode. The Normal Mode accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The High Speed Mode accept the digital servos for outputs from 1ch to 6 ch, including BLS Series, and most peripheral equipments such as the gyro or brushless ESCs. The frame rate of the outputs is 7ms.
Price: £140.86 (£165.51 Including VAT at 17.5%)
|  |
|
|
P-CIU-2 : Futaba Servo/Gyro Programming Interface USB Ref: 1447
The simple hook-up to sophisticated programming. Ideal for use with the GY520 gyro and MC401CR, MC601 or MC850 electronic speed controls. Includes USB connector and a 19.7" extension. Requires PC with Windows® Vista, XP, or 2000 operating system and USB port.
Price: £39.12 (£45.97 Including VAT at 17.5%)
|  |
|
|
HF2502 F3C Body for Align 250 Red Ref: 1335
Suitable for ALIGN T-REX250 series.Screwless-fixture quick released cabin design. Easier for battery disassembly and inspections.
Price: £42.54 (£49.98 Including VAT at 17.5%)
|  |
|
|
HF2501 F3C Body for Align 250 Ref: 1326
Suitable for ALIGN T-REX250 series.Screwless-fixture quick released cabin design. Easier for battery disassembly and inspections.
Price: £42.54 (£49.98 Including VAT at 17.5%)
|  |
|
|
3s 1p EON X 2200mah Ref: 2370
Item Nr: EONX30-22003S Weight: 195 grams LiPo Voltage: 11.1 V ,LiPo Config: 3S1P , Cont Discharge: 30C 66A, Burst Discharge: 60C 132A LiPo Height: 26 mm, LiPo Length: 107 mm, LiPo Width: 36 mm
Price: £39.09 (£45.93 Including VAT at 17.5%)
| |
|
|
TT3841K22R : Ecureuil Fuselage Combo Ref: 2383
TT3841K22R : Ecureuil Fuselage + Raptor 50 Titan Mechanics + Engine + Muffler + CFC Main BladesThe Thunder Tiger Ecureuil scale fuselage now combined with the Raptor Titan 50. As you can see in the photos, it comes with Titan 50 kit , Pro-50H heli engine, muffler and a pair of Thunder Tiger 620mm CFK blades. Fit your radio equipment to fly.
Price: £414.77 (£487.35 Including VAT at 17.5%)
|  |
|
|
Sceadu SDX Ref: 1972
The very latest version of the Sceadu series draws its inspiration (and a lot of very similar parts) from the awesome Turbulence D3. Hirobo has used the experience gained from 3D competiton and brought you an affordable 50 size machine that can really push the flight envelope and your skills to the limit.The entirely new FZ-5 rotor head uses the same basic design of the Turbulence head but adds the durability of engineering plastic for everyday use. It has been specifically designed with the 3D pilot in mind to give rapid response yet still retain the feel needed for precision and hovering stability.
Price: £273.90 (£321.83 Including VAT at 17.5%)
|  |
|
|
OS7 PLUGS Ref: 1880
A Medium/Hot glowplug for most types of aero or heli engine. A completely new design of coil is used to enhance performance. Particularly suited to engines running slightly rich to give a stable idle, broad peak needle setting and punchy acceleration. Is very practical for lower aircraft RPM applications. Helicopters will benefit from a more stable hovering RPM too.
Price: £5.00 (£5.88 Including VAT at 17.5%)
|  |
|
|
4241 GF Canopy Logo 400 orange/blue/white Ref: 904
Price: £42.57 (£50.02 Including VAT at 17.5%)
|  |
|
|
HS5084MG : Hitec Universal Fast Gyro/Car Servo Ref: 902
HS5084MG : Hitec Universal Fast Gyro/Car ServoThe extreme speed HSG-5084MG Digital Micro Tail Rotor servo is based of the HSG-5083 but utilizes a standard frame rate digital amplifier. Designed to work with most gyros the HSG-084MG is designed to to obtain optimum performance in the T-Rex 400-450 or similar class of electric helis.
Price: £26.08 (£30.64 Including VAT at 17.5%)
|  |
|
|
Spektrum DX6i / AR6200 rx combo Ref: 3030
A Ground Up DesignBuilding on the experience gained from both the DX6 and 7 the DX6i is a ground-up design delivering all of the advantages that Spektrum’s DSM2 technology offers, at a very affordable price. The ability to fly anywhere without concerns of frequency clashes, no more model generated interference and the added advantage of features like SmartSafe™, ModelMatch™ and ServoSync™ all contribute to making flying simply safer and more enjoyable with DX6i.
<more>
Price: £113.03 (£132.81 Including VAT at 17.5%)
|  |
|
|
TT9722 : REDLINE HI-FLOW 3D PIPE - RL53 (BLACK) Ref: 781
TT9722 : REDLINE HI-FLOW 3D PIPE - RL53 (BLACK)
The REDLINE HI-FLOW 3D PIPE is special designed to fit with the Thunder Tiger RL-53H helicopter engine. Features enlarged exhaust volume, with smooth airflow to help the engine generate extreme power output and high torque at high RPM. Steady backpressure flow design to make the engine run smoothly under different RPM conditions. To fit with RL-53H engine, TT9722 HI-FLOW 3D pipe will perform specifically at high RPM/high torque output while under the most demanding flight routines. It will be the best choice for the 3D extreme pilot.
Price: £41.70 (£49.00 Including VAT at 17.5%)
|  |
|
|
NHP Agressor 3d blade 600mm Ref: 320
NHP have developed a new 60cm symmetrical rotor blade designed for aggressive 3D flying. Big improvements in torsional and longitudinal stiffness with revised weight distribution have dramatically sharpened the pitch and cyclic response without compromising the fast flight stability and auto performance of the blade. A wider chord, 55mm, allows the blade to make best use of the increased power from modern glow and electric motors, whilst the tapered thickness section has less drag giving the pilot improved performance/duration particularly with electric models.
pic
Price: £42.54 (£49.98 Including VAT at 17.5%)
|  |
|
|
KX015074T : T-REX 450 PRO SUPER COMBO Ref: 442
KX015074T : T-REX 450 PRO SUPER COMBO Latest Release of the very popular T-Rex 450 series. This new top spec version comes complete with Motor, ESC, GP750 Gyro, 3x Align DS410MG Servos, 1 x DS520 Servo (Tail). It is all aluminium/carbon construction & now includes a torque tube driven tail for the first time on a T-Rex 450. Prepainted Canopy & Carbon blades also as standard
Price: £321.69 (£377.99 Including VAT at 17.5%)
|  |
|
|
NEW NHP Carbon Tail Blades Ref: 303
New NHP have developed a lighter and stiffer construction for their carbon fibre tail blades.
A lot of effort has be put into the improved construction of the blade so that there is around a 15% reduction in weight and a significant improvement in stiffness.
Blade size range is 75mm, 85mm, 92mm, 95mm, 100mm, 105mm, 110mm, 120mm, 130mm and 140mm.
A sharper response and smoother control can be expected from these new design tail blades.
See NHP Blades section for full detials.
NHP Tail Blades here
|  |
|
|
-GY520 : Futaba Piezo Gyro GY520 (AVCS) Ref: 526
-GY520 : Futaba Piezo Gyro GY520 (AVCS)Introducing the GY520. The smallest, lightest and most advanced gyro in the world. GY Series technology revolutionized gyro performance in 2000 -- and the GY520 is doing it again today. Its cutting-edge MEMS (Micro ElectroMechanical System) sensor design, ultra high-speed processing speed and advanced PID control algorithm put it a quantum leap ahead of all other heading hold gyros in size, weight and performance. It's the gyro of tomorrow -- and it's available today from Futaba.
Price: £130.43 (£153.26 Including VAT at 17.5%)
|  |
|
|
UH-1Y Fuselage R50 Ref: 3
TT3872MIThunder Tiger’s latest scale body for Raptor 50. Chances are you’ll see the most successful one ever. From military combat assaults to humanitarian evacuations, this proven workhorse executes any helicopter mission you’d care to imagine.The kit comes with pre-painted FRP fuselage and all needed hardware.Dress up your Raptor and be the focus at your flying field.
Price: £478.25 (£561.94 Including VAT at 17.5%)
|  |
|
|
H25090T ALLY CARRY CASE WITH WINDOW - TREX 250 Ref: 3674
For the T Rex 450
Price: £19.57 (£22.99 Including VAT at 17.5%)
|  |
|
|
H25089T ALLY CARRY CASE - TREX 250 Ref: 3673
For The Trex 250
Price: £19.57 (£22.99 Including VAT at 17.5%)
|  |
|
|
HE90H15T 90 size Muffler Align. Ref: 3653
Designed especially for 90 size engines - features more power , fuel-saving, low noise, and the highest air exhaust volume on the market.Great design and test to three spaces: expansion chamber, accelerated section, silencer chamber, high efficiency and quick throttle response, great for 3D flying.Use for O.S 91SR/HZ & ALIGN 91H/HP engine.
Price: £59.96 (£70.45 Including VAT at 17.5%)
|  |
|
|
CARBON FIBRE SHEETS Ref: 3664
NHP Carbon Fibre sheet is produced using high pressure and temperature (80 tons, 120 degrees c) to give superior strength and rigidity. The sheet lay-up is a multi-axial lay up, not only are the fibres laid at 0 and 90 degrees but also +45 and -45 degrees providing exceptional rigidity.
Available in the following sizes:
Dimensions 1.5 mm 2.00 mm 3.00 mm
800x600 mm £129.99 £149.99 £184.99
600x400 mm £70.19 £80.99 £99.89
400x300 mm £37.91 £43.74 £53.94
300x200 mm £20.47 £23.62 £29.13
200x150 mm £11.05 £12.75 £15.73
All prices are inclusive of 17.5% VAT
Please contact the shop to order.
|  |
|
|
Align 3s batt KX880002TA Trex 250 Ref: 1980
3S 1p 11.1v 850mah20c Ideal Battery for the Trex 250
Price: £14.68 (£17.25 Including VAT at 17.5%)
|  |
|
|
T-Rex 250 Ref: 3504
.This price is for the Kit with Motor, ESC RCEBL15X and 3 align Servos DS410.Other options will be available.
Price: £147.78 (£173.64 Including VAT at 17.5%)
|  |
|
|
Tail Boom Brace Ref: 3649
Increases strength of tail boom and improves tail rotor gyro holding power. Includes all mounting hardware and color matching tie wraps. A must for nitro and electric powered helis. Available in Red and Blue. Looks awesome on Trex600 with either metalic Red or metalic Blue tail boomsFMP1215
Price: £16.30 (£19.15 Including VAT at 17.5%)
|  |
|
|
Three Point Swash Level Trex 700 - FMP1233 Ref: 3647
Three point swashplate leveling tools for Trex600 helicopters!!Each 3 point swashplate level is CNC machined. machinery. Close tolerence requirements ensure the most accuracy possible.Makes a great companion tool to use with our bubble level swashplate tools.For Trex600 use FMP1232For Trex 700 use FMP1233
Price: £18.15 (£21.33 Including VAT at 17.5%)
| |
|
|
Three Point Swash Level - Trex 600 FMP1232 Ref: 3646
Three point swashplate leveling tools for Trex600 helicopters!!Each 3 point swashplate level is CNC machined. machinery. Close tolerence requirements ensure the most accuracy possible.Makes a great companion tool to use with our bubble level swashplate tools.For Trex600 use FMP1232 For Trex700 use FMP1233
Price: £18.15 (£21.33 Including VAT at 17.5%)
| |
|
|
Mini-G Gyro - YEI-YE-MINIG Ref: 3623
Small packaging, big performance, works great on anything from a 250 size to a 90 size nitro. The Mini G has several positives;- G-View compatible while still a breeze to setup without it.-Works with all tail servo types and brands. -Unique multimodel compatible default program. Just put it in any heli and it flys great. -Extensive built in parameters so if you want to fine tune it you can
Price: £117.38 (£137.92 Including VAT at 17.5%)
|  |
|
|
KZ0820116TA : Airwolf 450 Scale Fuselage (BLACK) Ref: 3628
Scale Airwolf fuselage including retracts, guns & missles. All fittings required are also included. The retracts just require a single Align DS410 servo to opertate them. Quick Canopy removal for battery replacement. Designed for the Trex 450.
Price: £69.56 (£81.73 Including VAT at 17.5%)
|  |
|
|
KZ0820113TA : 450 Scale Fuselage 500D Ref: 3626
Suitable for ALIGN T-REX450 series. Movable radar. High detailed scare missile launcher. Quick Removable canopy for easy removal or battery.
Price: £60.86 (£71.51 Including VAT at 17.5%)
|  |
|
|
KZ0820112TA : Airwolf 500 Scale Fuselage (BLACK) Ref: 3570
Scale Airwolf fuselage including retracts, guns & missles. All fittings required are also included. The retracts just require a single Align DS410 servo to opertate them. The lower part of the fuselage is reinforced internally with carbon fibre to add strength. Quick Canopy removal for battery replacement. Designed for the Trex 500.
Price: £113.03 (£132.81 Including VAT at 17.5%)
|  |
|
|
KZ0820110TA : Airwolf 500 Scale Fuselage (BLUE) Ref: 3622
Scale Airwolf fuselage including retracts, guns & missles. All fittings required are also included. The retracts just require a single Align DS410 servo to opertate them. The lower part of the fuselage is reinforced internally with carbon fibre to add strength. Quick Canopy removal for battery replacement. Designed for the Trex 500.
Price: £113.03 (£132.81 Including VAT at 17.5%)
|  |
|
|
Rondo Flybarless Ref: 3184
Includes Programming UnitIn the past paddleless or flybarless flying was reserved for the skilled pilot ready to invest a lot of money and spend a lot of time on the installation and setup of the system.That changes now! The revolutionary Rondo confutes reservations against flybarless flying and offers a simple approach with an outstanding result. That is why Rondo is equally suited and recommended for beginners as well as full professionals. This recommendation is underlined furthermore by the favourable purchase price.
Price: £286.91 (£337.12 Including VAT at 17.5%)
|  |
|
|
EFL Blade CX3 MD 520N BNF Ref: 3113
Bind & Fly version Use your own Spektrum TxKey FeaturesAdvanced 3-in-1 control unit including main motor ESCs, mixer and heading lock gyroThe heading lock gyro in the CX3 offers incredible hold and control to maximize your flight experience.Two feather-light S60 Super Sub-Micro servos—just 6.0 grams each2S 7.4V 800mAh Li-Po battery pack with charge protection circuitryDC Li-Po balancing charger and AC AdapterCompatible with all aircraft transmitters and modules equipped with Spektrum DSM2 technologySpektrum™ AR6100e 2.4GHz DSM2™ receiver included–just bind to your DSM2 transmitter and fly!Coaxial, counter-rotating rotor blades that make hovering easy for first-time pilots100% factory-assembled, test-flown and ready-to-fly right from the boxCompatible with most Blade CX2 option parts
Price: £101.27 (£118.99 Including VAT at 17.5%)
|  |
|
|
EFL Blade CX3 MD 520N RTF Ref: 3115
Key FeaturesAdvanced 3-in-1 control unit including main motor ESCs, mixer and heading lock gyroThe heading lock gyro in the CX3 offers incredible hold and control to maximize your flight experience.Interference free 5-channel E-flite transmitter with built-in Spektrum 2.4GHz DSM2 technologyLightweight Spektrum AR6100e receiver with DSM2 technologyTwo feather-light S60 Super Sub-Micro servos--just 6.0 grams eachDC Li-Po balancing charger and convenient AC adapter2S 7.4V 800mAh Li-Po battery pack with charge protection circuitryCo-axial, counter-rotating rotor blades that make hovering easy for first-time pilots100% factory assembled and test flown--no assembly or difficult setup requiredCompatible with most Blade CX2 option parts
Price: £124.25 (£145.99 Including VAT at 17.5%)
| |
|
|
Funtech HN 90 type F Muffler Ref: 2245
Limited stocks of this new Funtech pipe - looks great and utilises an insulated floating manifold system. It is very durable and provides silent characteristics and high torque. Left or right mounting. OS/YS universal
pic
Price: £99.99 (£117.49 Including VAT at 17.5%)
|  |
|
|
JR DSX12 2.4ghz Radio Ref: 3600
Tx/Rx comboDSM/DSM2 compatibleCompatible with all Spektrum and JR DSM brand aircraft receiversR1221 receiver included50-model memoryAdvanced programming with more features for today's complex modelsOne transmitter for all model types, includes programming for Air, Heli, and Sailplane
Price: £1,195.61 (£1,404.84 Including VAT at 17.5%)
| |
|
|
KX870017A : Align GP750 Gyro + DS420 Servo Combo Ref: 3602
Align GP750 Gyro + DS420 Servo, this is the combo that is supplied as standard in the T-Rex 250 Super Combo. Ideal for any small 250/450 Sized electric Helicopter. The gyro can be used in any model upto a 90 size
Price: £95.64 (£112.38 Including VAT at 17.5%)
|  |
|
|
KX870018TA : Align GP750 Gyro & DS520 Servo Combo Ref: 3603
Align GP750 Gyro + DS520 Servo. Ideal for any 450-500 Sized Electric Helicopter. The gyro can be used in any model upto a 90 size
Price: £111.30 (£130.78 Including VAT at 17.5%)
|  |
|
|
KX870015TA : Align GP750 Gyro & DS620 Servo Combo Ref: 3601
Align GP750 Gyro + DS620 Servo. Ideal for any small 600-700 (50-90) Sized Helicopter. The gyro can be used in any model upto a 90 size
Price: £121.73 (£143.03 Including VAT at 17.5%)
|  |
|
|
eCCPM Conversion Kit Raptor 30-50; Carbon /Alloy Ref: 3599
CCPM Conversion Kit Raptor 30-50; Carbon - FeaturesUpgrades your stock Raptor 30, 50, SE or Titan class helicopter into a high performance and high precision aerobatic 3D helicopter. 120 and 140 degree custom designed heavy duty CCPM swash plate, Push Pull ball raced linkages on all control surfaces .Allows full collective stroke of approx 25 deg (+13 to -12) Custom lightweight hollow main shaft and CNC machined parts , Carbon Fiber (2.0mm) servo frames Simple non destructive upgrade and easy to setup 20 page easy to follow color manual details disassembly, assembly and setup. Designed from scratch, this conversion kit will knock the socks off the competition.
Price: £113.03 (£132.81 Including VAT at 17.5%)
|  |
|
|
Vision 50 from Ely Q Ref: 3560
Although this is Ely Q first heli it has been substantially flight tested by their Team Pilots Danny Szabo, Marcus Kim , Guiseppe Robertone and Massimo Rubinelli.It has a new chassis design which increases rigidity and ease of maintenance. It is light and performance is suitable for the complete beginner or the top level 3d pilot.
Price: £147.82 (£173.69 Including VAT at 17.5%)
|  |
|
|
Alu case for T-Rex 500 Robbe 'Team Pilot' Ref: 3540
RB5723 : Robbe Aluminium Carry Case - T-Rex 500 comes with a set of wheels for easier transportation.Size 89cm x 38cm x 21cm. Internal cut out for the Trex 500, Transmitter and spare batteries.
Price: £67.19 (£78.95 Including VAT at 17.5%)
|  |
|
|
Radix Main Blades 600mm Stick Banger Ref: 3526
YEI-RX 600mm SBA new 600mm Length main blades thats lighter in weight (around 126g) than the normal Radix 600's for the quick poppy flight characteristics 3d pilots look for
Price: £60.86 (£71.51 Including VAT at 17.5%)
|  |
|
|
Scorpion HK4035-500kv Brushless Motor Ref: 3519
The Scorpion HK-4035 motors have been developed for the newer 600 and 700 class electric helicopters that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.
Price: £104.34 (£122.60 Including VAT at 17.5%)
|  |
|
|
Scorpion HK4035-560kv Brushless Motor Ref: 3520
The Scorpion HK-4035 motors have been developed for the newer 600 and 700 class electric helicopters that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.
Price: £104.34 (£122.60 Including VAT at 17.5%)
|  |
|
|
Scorpion HK4035-630kv Brushless Motor Ref: 3521
The Scorpion HK-4035 motors have been developed for the newer 600 and 700 class electric helicopters that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.
Price: £104.34 (£122.60 Including VAT at 17.5%)
|  |
|
|
4167 T-Rex 500 VBar Upgrade Ref: 3517
Nb: the head,swash and grips are not supplied. Only the items required to convert to flybarless.it does include the swashdriver/mixer.
Price: £48.61 (£57.12 Including VAT at 17.5%)
|  |
|
|
Training Voucher Gift Ref: 3489
MFT North West Helicopter Flight Training for 1 hours session.click the boxes for additional hours or if you require a full day 8 hour session give us a ring for pricing
Price: £34.04 (£40.00 Including VAT at 17.5%)
|  |
|
|
p-S3157 Digital Servo Ref: 3513
Futaba S3157 Digital High Speed/High Torque Micro Servo SPECS: Torque:(1.5 kg-cm) @ 4.8V-(1.7 kg-cm) @ 6.0V Speed: .10 sec/60° @ 4.8V .09 sec/60° @ 6.0V Size: 21.8 x 11 x 23.2mmWeight: 8.3g
Price: £19.56 (£22.98 Including VAT at 17.5%)
|  |
|
|
P-S3153 Digital Servo Ref: 3514
Futaba S3153 Digital Micro ServoS3153 takes the already impressive performance still further, with the addition of digital holding power and precision. Spec:-Speed: 0.10s/60 deg (at 6V). Torque: 1.7kg/cm (at 6V).Dimensions: 21.8 x 11.0 x 20.3mm. Weight: 9.6g
Price: £22.97 (£26.99 Including VAT at 17.5%)
|  |
|
|
P-S3117 Servo Ref: 3516
Futaba P-S3117 Micro ServoSpec:speed 0.10 @4.8v, 0.09 @6.0vtorque 1.5kg/1.7kgsize, 21.8x11x23.2weight 8.5gr
Price: £13.61 (£15.99 Including VAT at 17.5%)
|  |
|
|
Aurora Ref: 1320
Capitalizing on the wildly successful FX and EFX, Avant RC introduces its most advanced model helicopter to date. This is a 100% Avant purebred complete kit. The model uses the tried-and-true and very succesful CCPM system and the Avant Programmable Head and combines them with the rest of a design that takes the state of the art in high performance helicopters to a new level. We have a small number in stock Nov 1 for immediatee shipping!!MAKE NO MISTAKE - THIS WILL BE THE MODEL TO HAVE
Price: £680.84 (£799.99 Including VAT at 17.5%)
|  |
|
|
Logo 400 Spares Ref: 3484
A small batch of logo 400 spares have just turned
go to Spares Page
|  |
|
|
YEI-RAVE3D : RAVE 3D HELICOPTER KIT COMBO Ref: 3429
Introducing the new Rave 450 sized electric helicopter designed by Curtis Youngblood and Next D Designs (A division of CJ Youngblood Enterprises). This helicopter features an all metal head, high quality parts, carbon fiber u-frame design, tube driven tail and can run either 325mm or 350mm main blades in its stock form. BACK IN STOCK NOV 1st FOR IMMEDIATE SHIPPING
Price: £272.39 (£320.06 Including VAT at 17.5%)
|  |
|
|
Stubz 2mm Paddles 68mm Ref: 3432
YEI-STZ682 : Stubz 2mm Paddles 68mmThese responsive paddles are perfect for your 450 sized helicopter. High speed and stable performance, plus they come with flybar weights so you can tune your setup to your liking.
Price: £15.64 (£18.38 Including VAT at 17.5%)
|  |
|
|
Blade CX Ultra Micro RTF Mode 2 Ref: 3434
EFLH2200IM2 : The Blade® mCX is an ultra micro-sized version of the Blade CX/CX2, offering first-time pilots the ability to learn how to fly with ease and experienced heli pilots the ability to fly anytime, anywhere indoors. The Blade mCX offers unsurpassed stability and incredible control through the coaxial, counter-rotating head design and Spektrum 2.4GHz DSM2 control. And, thanks to its rotor span of just 7.5 inches and one-ounce flying weight, the Blade mCX can be flown indoors almost anywhere from an office to a small bedroom or living room.
Price: £76.48 (£89.86 Including VAT at 17.5%)
|  |
|
|
Blade CX Ultra Micro DSM2 BNF Ref: 3435
EFLH2280I : Blade CX Ultra Micro DSM2 BNFThe Blade® mCX is an ultra micro-sized version of the Blade CX/CX2 that offers first-time and experienced helicopter pilots unsurpassed stability and incredible control through the coaxial, counter-rotating head design and Spektrum 2.4GHz DSM2 control. Its single-cell Li-Po battery charges in approximately 30 minutes and delivers flight times of 6-8 minutes, while full, 4-channel control provides the precision needed for flying in those tight spaces indoors. All you need to do is bind your DSM2 transmitter or module to the Blade mCX's receiver and your adventure into the new era of RC flight begins. With its cutting-edge engineering, design, technology and performance, the Blade mCX Bind-N-Fly is sure to provide you with hours of helicopter flying fun.
Price: £49.78 (£58.49 Including VAT at 17.5%)
|  |
|
|
Scorpion HK-4025-630KV Brushless Motor Ref: 3425
The Scorpion HK-4025 motors have been developed for the newer 550 to 600 class electric helicopters that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics
Price: £69.56 (£81.73 Including VAT at 17.5%)
|  |
|
|
Scorpion HK-4025-740KV Brushless Motor Ref: 3426
The Scorpion HK-4025 motors have been developed for the newer 550 to 600 class electric helicopters that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.
Price: £69.56 (£81.73 Including VAT at 17.5%)
|  |
|
|
Scorpion HK-4025-890KV Brushless Motor Ref: 3427
The Scorpion HK-4025 motors have been developed for the newer 550 to 600 class electric helicopters that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics
Price: £69.56 (£81.73 Including VAT at 17.5%)
|  |
|
|
325mm Wooden Rotor Blade (RCT0091-XT) Ref: 3417
High quality wooden blade for Trex 450, Blade 400(with spacers) and most 450 sized helisBlade Length ( tip to tip) - 325mmBlade Root thickness - 5mmBlade bolt hole size - 3mmBlade approximate weigth - 18~19 gramsSuitable for mild aerobatics and mild 3D.
Price: £6.77 (£7.95 Including VAT at 17.5%)
|  |
|
|
KZ0820107TA : H500E 450 Fuselage Set - Army Ref: 3408
Suitable for ALIGN T-REX450 series
Price: £41.28 (£48.50 Including VAT at 17.5%)
|  |
|
|
KZ0820106TA : H500E 450 Fuselage Set - White/Blue/Red Ref: 3407
Suitable for ALIGN T-REX450 series
Price: £43.47 (£51.08 Including VAT at 17.5%)
|  |
|
|
KZ0820105TA : H500E 450 Fuselage Set - White/Red/Blue Ref: 3406
Suitable for ALIGN T-REX450 series
Price: £43.47 (£51.08 Including VAT at 17.5%)
|  |
|
|
Logo 400 kit Ref: 3405
The LOGO 400 series is Mikado’s newest helicopter design.Alongside the many quality characteristics typical of Mikado products, the LOGO 400 features a rotor diameter of approx. 1 meter (430 mm rotor blades) and an ultra low RTF weight permitting the use of small inexpensive LiPo batteries. This makes it very easy for novices to enter into the exciting world of electric heli flying.
Price: £173.87 (£204.30 Including VAT at 17.5%)
|  |
|
|
ELY Q VOLTAGE REGULATOR Ref: 3403
New Programmable Voltage Regulator, allowing the use of any 2 Cell Lithium pack or 5-7 Cell Nicad/Nimh Pack. It also has fully programmable outputs Programmable multioutputs for the servos of 5Volts, 6Volts, 7,2Volts, Transparent mode
Price: £41.70 (£49.00 Including VAT at 17.5%)
|  |
|
|
YEI-RX72 : Radix 72mm Tail Blades Ref: 3402
Ideal for Trex 500 and similar sized helis
Price: £19.12 (£22.47 Including VAT at 17.5%)
|  |
|
|
YEI-RX59 : Radix 59mm Tail Blades Ref: 3401
Ideal for the Trex 450 and other 400 size models
Price: £12.16 (£14.29 Including VAT at 17.5%)
| |
|
|
FUTABA 10ch S3152x4 2.4GHz (N) MM R6014FS Ref: 3398
P-FP10C2-4G : The eagerly awaited Futaba 10C radio is here! Supplied on 2.4GHz – with the lastest, 21g R6014FS receiver and four S3152 digital servos – it is also capable of operating your existing compatible PPM and PCM 35MHz receivers by simply changing the module. With a full 10 channels and FASST transmission it has a large, backlit custom LCD screen and highly effective jog-dial to make navigation between menus simple.Supplied as standard with 15 model memories, this can be increased with the addition of an optional CAMPac. With dedicated aircraft, helicopter and glider programmes, the 10C has exceptional functionality and offers no less than 9 factory defined aircraft mixes, 8 heli mixes, 12 glider mixes and up to 8 freely-programmable mixes, the 10C offers high-end radio performance at a sports system price. Perfect for club and competitions pilots alike, it just has to be seen to be believed!
Price: £497.86 (£584.99 Including VAT at 17.5%)
|  |
|
|
Spektrum Transmitter case Ref: 3397
Tough aluminum exterior for maximum protectionCustom-fit for Spektrum DX aircraft radio systemsPrecut foam inserts for transmitter and accessoriesDurable stainless steel lockable latches
Price: £34.00 (£39.95 Including VAT at 17.5%)
|  |
|
|
HE90H02 Align 91HP Engine Ref: 3395
MADE IN JAPAN ALIGN Hyper engine for superior 91 size helicopter.Delivers more horsepower for higher rotor speeds.New design for crankcase, provides good support to the crankshaft and ball bearing.Besides good looks and excellent cooling, this engine is machined blue alumite heat sink head also boosts combustion efficiency for more power stability.
Price: £211.26 (£248.23 Including VAT at 17.5%)
|  |
|
|
HE90H01 ALIGN 91H Engine Ref: 3394
MADE IN JAPAN ALIGN Hyper engine for superior 91 size helicopter.Delivers more horsepower for higher rotor speeds.New design for crankcase, provides good support to the crankshaft and ball bearing.Besides good looks and excellent cooling, this engine has machined black alumite heat sink head also boosts combustion efficiency for more power stability.
Price: £207.35 (£243.64 Including VAT at 17.5%)
|  |
|
|
THPH325CF : ThunderPower Carbon Main Blades 325mm Ref: 3391
High Quality & performance Carbon Main Blades from the Thunder Power company (Well known for their Lipo Batterys) These blades are aimed at all levels of pilot right upto extreme 3D but are very competitively priced with no compromise on quality. Will fit T-Rex 450, Mini-Titan (With included spacers), Furion 450, Rave 3D etc
Price: £28.65 (£33.66 Including VAT at 17.5%)
|  |
|
|
OS91HZ Ring Ref: 1868
The new engine from OS.We have just recieved a small delivery of these engines, dont miss outDesigned expressly for the F3C & 3D competition. Improved hovering stability as well as power at high speed to meet the further sophisticated F3C competition manouevres New design piston and crankshaft reduces vibration to provide further, stable torque over the entire RPM range. The rectangular heatsink head is completely included in the cooling shroud for better cooling in a fully enclosed body. Black alumite finish with O.S. and 91HZ logos impart a distinctive image. Integral back plate heatsink improves crankcase cooling. A Thermo insulator is installed on the carburetor mounting spigot helps shut out engine heat to the carburettor, which in turn ensures a stable fuel/air mixture. Needle Control Lever with O.S. Engines logo is supplied with the engine as standard for the CSM carbsmart.
Price: £221.27 (£259.99 Including VAT at 17.5%)
|  |
|
|
4056 : MIKADO BLUETOOTH ADAPTOR - V-BAR Ref: 3381
Bluetooth Adaptor for the programming of the V-Bar Flybarless System.
Price: £86.91 (£102.12 Including VAT at 17.5%)
|  |
|
|
4152 : MIKADO V-BAR CONTROL PANEL Ref: 3382
The V-Bar Control Panel is connected directly to the V-Bar via cable and allows you to program the V-Bar with necessary data such as initial set-up and parameter adjustment right at the flying field. The panel features an ergonomically correct turning knob and push button which have been integrated for easy operation, an SD card for loading model data or updating set-up software, and a high-contrast display which is readable even in bright sunlight. The SD card can also be used to transfer model data to another pilot’s helicopter.
Price: £86.10 (£101.17 Including VAT at 17.5%)
|  |
|
|
FMP Ultimate Push Rod Tool Ref: 3376
FMP1094NOTE: This tool is used with a set of machinist calipers (not supplied), digital (recommended) or dial. A set of machinist calipers is a very precise tool and when used with the Ultimate ball link measuring tool, adds to their usefulness. Proper care and handling of both will greatly extend their useful life and precision. We have tested the Ultimate pushrod measuring tool on several sets of calipers.
Price: £15.61 (£18.34 Including VAT at 17.5%)
|  |
|
|
ALIGN DS 510 DIGITAL SERVO Ref: 3368
K10419A : Coreless Motor Design for fast speed, high efficiency, and low power consumption. 10 Bits signal resolution for smooth movements. Fast speed with high torque of 4.6kg/cm. High strength composite alloy gears with high precision and durable structure characteristics. Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency. Supports digital & analog control signal. Powerful and precise servo suitable for T-Rex 500 CCPM cyclic use.
Price: £26.08 (£30.64 Including VAT at 17.5%)
|  |
|
|
Align DS 520 Digital Servo Ref: 3374
Coreless Motor Design for fast speed, high efficiency, and low power consumption.10 Bits signal resolution for smooth movements.Response time of 0.07s/60°. High strength composite alloy gears with high precision and durable structure characteristics.Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.Supports digital & analog control signal.Powerful and precise servo suitable for T-Rex 500 CCPM cyclic and rudder servo use.
Price: £26.08 (£30.64 Including VAT at 17.5%)
|  |
|
|
Align DS610 Digital Servo Ref: 3375
Coreless Motor Design for fast speed, high efficiency, and low power consumption.12 Bits signal resolution for smooth movements.Fast speed and high torque. High strength titanium alloy gears with high precision and durable structure characteristics.Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.Supports digital & analog control signal.Powerful and precise servo, suitable for T-Rex 600/700 swashplate and rudder use
Price: £37.38 (£43.92 Including VAT at 17.5%)
|  |
|
|
Align DS620 Digital Servo Ref: 3373
Coreless Motor Design for fast speed, high efficiency, and low power consumption.12 Bits signal resolution for smooth movements.Fast speed and high torque. High strength titanium alloy gears with high precision and durable structure characteristics.Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.Supports digital & analog control signal.Powerful and precise servo, suitable for T-Rex 600/700 swashplate and rudder use and most other 30/90 size machines.
Price: £37.38 (£43.92 Including VAT at 17.5%)
|  |
|
|
HE50H09 : Align RCE-G600 Governor Ref: 3372
Engine Governor for use on almost all Glow Models with the ability to fit the sensor magnets to the cooling fan. Compact design, easy use, simple setting with great speed control performance. Speed resolution: 0.1RPM. Speed stability accuracy: within 1%(Steady State). Not compatible with Futaba S9251/S9256 and other 760µs
Price: £34.77 (£40.85 Including VAT at 17.5%)
|  |
|
|
 | OPTIFUEL Ref: 3359
Revolution Models is pleased to be asked to sell this new UK based product, which was released at the recent 3D Masters competitionOptifuel is a new nitromethane based fuel for 2-stroke and 4-stoke engines of all sizes. It has been developed by professionals to give the user high power, great throttle response and a very clean burn with virtually no carbon build up.Optifuel is manufactured in a brand new flame proof plant designed specifically for the production of nitromethane based fuels and uses the latest weighing technology. Optifuel is the product of extensive flight testing with hundreds of hours logged using the latest data logger technologies. The finest grade raw materials are used with 100% synthetic oil only.Each bottle contains a full 5 litres not 3.78L or 4.54L, Work out the price /litre and you will find that it is very competitive with all other main line fuels in the UK.We can ship mainland UK
(LINK) to Fuel Page
|
|
|
|
H50104 CFC Main Blades Ref: 3357
Price: £29.78 (£34.99 Including VAT at 17.5%)
|  |
|
|
FMP1127 Assorted screw box Ref: 3352
The new FMP heli hardware kit contains 240 pieces of the most common heli hardware parts all contained in it own re-sealable storage box. All socket head bolts are grade 12.9, the strongest metric hardware available.Perfect for both field and bench.
Price: £17.38 (£20.42 Including VAT at 17.5%)
|  |
|
|
Henseleit MP Servo Conversion Ref: 3350
CFC frame conversion for the MP range so as to allow the fitting of full size servos. Necessary if you intend to go flybarless.
Price: £86.91 (£102.12 Including VAT at 17.5%)
| |
|
|
Scorpion 90amp ESC 6 > 26v Ref: 3287
SpecificationsWeight (Without Connectors) 65.9gm ( 2.32oz) Max Continuous Current 90 Amps Operating Voltage Range 6 to 26 Volts Max BEC Output 4 Amps @ 5.5 V On Resistance 2.56 mOhms Size 68.4 x 30.2 x 14mm (2.69 x 1.19 x 0.55in)
Price: £108.69 (£127.71 Including VAT at 17.5%)
|  |
|
|
Scorpion 120amp ESC 6 > 26v Ref: 3289
SpecificationsWeight (Without Connectors) 82.8gm ( 2.92oz) Max Continuous Current 120 Amps Operating Voltage Range 6 to 26 Volts Max BEC Output 4 Amps @ 5.5 V On Resistance 2.33 mOhms Size 83.6 x 30.2 x 17mm (3.29 x 1.19 x 0.69in)
Price: £93.61 (£109.99 Including VAT at 17.5%)
|  |
|
|
Scorpion 35amp ESC Ref: 3259
The Scorpion Commander 15v Series Brushless Speed Controllers are designed to work with any brushless motor, and they are a perfect match for the Scorpion 22mm S-Series, 22mm HK-Series and 30mm S-Series Brushless motors.
Price: £28.08 (£32.99 Including VAT at 17.5%)
|  |
|
|
Scorpion 60amp ESC Ref: 3258
The Scorpion 26V Commander Series Brushless Speed Controllers are designed to work with any brushless motor, and they are a perfect match for the entire range of Scorpion Brushless motors.
Price: £68.04 (£79.95 Including VAT at 17.5%)
|  |
|
|
HK3026-1600kv Ref: 3254
The Scorpion HK-Series 30mm brushless motors are designed for RC Helicopters in the 500-550 size range. They also work great in aircraft needing a High-Kv motor such as Pylon Racers and Hotliners.
Price: £43.04 (£50.57 Including VAT at 17.5%)
|  |
|
|
Scorpion HK2221-6 Ref: 3256
The Scorpion HK-Series 22mm brushless motors are designed to provide reliable power for your smaller RC aircraft and helicopter
Price: £30.39 (£35.71 Including VAT at 17.5%)
|  |
|
|
Scorpion HK2221-8 Ref: 3255
The Scorpion HK-Series 22mm brushless motors are designed to provide reliable power for your smaller RC aircraft and helicopter. Trex 450 etc.
Price: £30.39 (£35.71 Including VAT at 17.5%)
|  |
|
|
TP2600-6SX : Thunderpower 22.2v 2600mah Extreme V2 Lipo Ref: 3249
New Extreme V2 22.2v 2600mah Lipo Pack, ideal for models such as the T-Rex 500, Protus etc. Weight : 410g, Size : 44x39x125.
Price: £97.35 (£114.39 Including VAT at 17.5%)
|  |
|
|
P-MR-14 : TM-14/R6014FS 2.4ghz Module & Receiver Combo Ref: 2747
BACK IN STOCKP-MR-14 : TM-14/R6014FS 2.4ghz Module & Receiver ComboThe competitor's module for the 14MZ limit you to 8-channel operation. Futaba's is the only one that lets you use all fourteen channels. Fits the 14MZ, as well as the 12Z and 12FG. Includes a TM-14 module and R6014FS receiver
Price: £247.78 (£291.14 Including VAT at 17.5%)
|  |
|
|
Twister Hawk Ref: 2459
LOWER PRICE WHILST STOCKS LAST- DONT MISS OUT6600050 : TWISTER HAWK ARMY RTF RC/LIPO/CHRGR (UK)Factory-assembled Ready-to-Fly scale RC helicopter EVERYTHING included. Checked, test-flown and Flight Guaranteed - so you know it flies!
<more>
Price: £82.57 (£97.02 Including VAT at 17.5%)
|  |
|
|
CN Reflex Ref: 2424
CN-REFLEX : REFLEX XTR SOFTWARE V 5.04 + USB DONGLE (New Lower Price)This is a new version with new improved USB dongle & software. It has the latest software with more models/scenery & this version is now Windows Vista compatible also. All future updates that Reflex offer will only be compatible with this newer version.
<more>
Price: £80.81 (£94.95 Including VAT at 17.5%)
|  |
Choose_Lead
|
|
|
SPMAR7100R : SPEKTRUM AR7100R 2.4GHZ DSM2 7CH HELI RX + REV LIMITER Ref: 3218
The AR7100 is Spektrum’s first purpose-built receiver designed specifically for demanding heli applications. The combination of a primary internal receiver and secondary remote receiver allows the AR7100 to be installed in the best possible configuration for high-performance heli's, while exposing the receiver to the greatest possible RF signal at all times. Additionally, the AR7100R features Spektrum’s integrated RevLimit RPM limiter which provides the consistent rotor speed needed for outstanding 3D performance. Complete with two user-selectable failsafe modes, a built-in 5.2V 2A voltage regulator and EC3 connectors, the AR7100R is the best choice for heli pilots looking to add the safety, security and clarity of Spektrum 2.4GHz DSM technology to their aircraft while reducing the amount of on-board equipment and simplifying installation.
Price: £114.89 (£135.00 Including VAT at 17.5%)
|  |
|
|
SPMAR7100 : SPEKTRUM AR7100 2.4GHZ DSM2 HELI RECEIVER Ref: 3217
The AR7100 is Spektrum’s first purpose-built receiver designed specifically for demanding heli applications. The combination of a primary internal receiver and secondary remote receiver allows the AR7100 to be installed in the best possible configuration for virtually any heli, while exposing the receiver to the greatest possible RF signal at all times. Additional features like two user-selectable failsafe modes, a built-in 5.2V 2A voltage regulator and EC3 connectors make the AR7100 the best choice for any heli pilot who wants the safety, security and clarity of 2.4GHz DSM technology.
Price: £80.42 (£94.49 Including VAT at 17.5%)
|  |
|
|
KZ0910103A : H500E 600 Fuselage Set - Police Ref: 3216
Pre-painted fuselage complete with fittings. Suitable for ALIGN T-REX600 Nitro.
Price: £212.76 (£249.99 Including VAT at 17.5%)
|  |
|
|
TT3837C : MD530 CIVIL SCALE SHELL FOR RAPTOR 50 Ref: 3109
Widely used for pleasure flights, site inspections, photo shoots and corporate transport, the popular MD-530 is now available from Thunder Tiger in a factory pre-painted civil scheme. This FRP fuselage with all necessary hardware and scale fittings only takes a couple hours of enjoyable assembly time and then you can experience this outstanding scale chopper in the field.
Price: £161.69 (£189.99 Including VAT at 17.5%)
|  |
|
|
KZ0910101A : H500MD 600 Fuselage Set - US Army Ref: 3214
Pre-painted fuselage complete with fittings. Suitable for ALIGN T-REX600 Nitro.
Price: £242.54 (£284.98 Including VAT at 17.5%)
|  |
|
|
Spartan DS760 SMM AVCS Gyro Ref: 2546
SP-DS760 : Spartan DS760 SMM AVCS GyroThe ds760 is a high specification model helicopter gyro capable of delivering the highest standards of performance. At its heart a premium quality Silicon Micro Machined (SMM) sensor and powerful Digital Signal Controller together with Spartan RC’s adaptive control algorithms offer exceptionally consistent yaw rates that remain unaffected by outside variables like the helicopter’s rotor head speed, rotor disc loading, flight speed, wind, etc. This is a significant feature that not many gyros are capable of and is a necessity for doing complex pirouetting 3D manoeuvres. The gain can be adjusted to a high level of holding power without experiencing issues with tail oscillation (hunting). The holding ability of the gyro is excellent and precise giving a very solid feel. The stopping characteristics give a nice soft but precise response with no bounce back.
<more>
Price: £81.54 (£95.81 Including VAT at 17.5%)
|  |
|
|
EFLH1415C : B400 325MM MAIN ROTOR BLADES CARBON FIBRE Ref: 3187
CFC Blades for the Eflight Blade 400
Price: £24.69 (£29.01 Including VAT at 17.5%)
|  |
|
|
V bar 4010 Ref: 3173
Digital rotor heads are here: With the Virtual Flybar System (“V-Bar”)4010 is Without Air Pressure Sensor
Price: £295.61 (£347.34 Including VAT at 17.5%)
| |
|
