| | |
HN6110 : Align 3G Flybarless Conversion (T-Rex 600)
This is the new eagerly awaited official Flybarless conversion for the T-Rex 600. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 600 to a fully flybarless helicopter. Release date is to be confirmed but is not expected to be too far away. Price is also subject to change, but we expect this will be correct, if there is any change it will be confirmed prior to shipping. You will not be charged until the day of despatch a pre-order will guarantee your place in the queue for what is expected to be very popular.
Price: £242.54 (£284.98 Including VAT at 17.5%)
|  |
Colour
|
|
 |
Align Super Starter for Helicopter STQ-100
HFSSTQ01 : Align Super Starter for Helicopter STQ-100 (YELLOW)High Powered Geared Starter designed for use with any size engine from 30-90 Size Glow or upto 50cc. This includes a no-load hex starter extension that contains a double one-way bearing for increased durability. All of this is packaged in a very neat plastic case to keep it safe. There is space for an optional Aeroplane spinner attachment
Price: £66.95 (£78.67 Including VAT at 17.5%)
|  |
Coluor Preference
|
|
|
K10457TA : PU Adhesive Gel
PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
K10390A : Align Dial Pitch Gauge
Smart design, small size, built strong for easy and reliable use. Supports blade sizes from 300-700mm ,blade width 62mm with a pitch range of ± 15°. Laser geared dial for pitch selection to an accuracy of 0.01 degrees. Use for T-REX 450/500/600/700.
Price: £10.64 (£12.50 Including VAT at 17.5%)
|  |
|
|
K10381TA 5.1v two way step down regulator
For some servos such as Futaba servo models 9241, 9251, 9253, 9254, 9255, 9256 and other digital servos are not capable of handling 6V, please connect a 5.1V step-down voltage regulator to the rudder servo, or connect it between BEC (ex. RCE-B6X) and the receiver for all servos. It could avoid the servos overloading and damage.
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HE50H11 : 2 in 1 Voltage Regulator / Glow
HE50H11 : B6T 2 IN 1 VOLTAGE REGULATOR/GLOW/LIPO7.4V 1900MAH Lipo with Regulator & Battery Status Indicator. The regulator has been made waterproof to reduce the chance of outside damage from fuel contanimation. It also has a filter capacitor to reduce high frequency interferance. It has an integral automatic glow ignitor also. When the integrated power switch is moved to the on position, the voltage indicating LED’s and ignition indicating LED’s will illuminate displaying the status of the battery voltage, and of the plug ignition function
Price: £43.47 (£51.08 Including VAT at 17.5%)
|  |
|
|
KX860015TA : Align Li-Po 2S1P 7.4v 1900mah/18C
Price: £16.15 (£18.98 Including VAT at 17.5%)
|  |
|
|
H60002 : Bearing (MR148ZZ) (4pcs)
Price: £6.08 (£7.14 Including VAT at 17.5%)
|  |
|
|
H60003 : Main Rotor Holder (Set)
Price: £5.00 (£5.88 Including VAT at 17.5%)
|  |
|
|
H60004 : Metal Main Rotor Housing
Price: £21.30 (£25.03 Including VAT at 17.5%)
|  |
|
|
H60004-00 : Metal Main Rotor Housing Black
Std on Super Pro
Price: £21.30 (£25.03 Including VAT at 17.5%)
|  |
|
|
H60004-84 : Metal Main Rotor Housing Blue
Std on Super Pro
Price: £21.30 (£25.03 Including VAT at 17.5%)
|  |
|
|
H60005-84 : Metal Head Stopper - Blue
Use for T-REX 600/600 Nitro. Standard on the Super Pro.
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60005-00: Metal Head Stopper - BLACK
Std on Super Pro
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60006 : Feathering Shaft (2pcs)
Feathering Shaft (2pcs)
Price: £4.78 (£5.62 Including VAT at 17.5%)
|  |
|
|
H60007 : SF Mixing Lever (Set)
Price: £6.95 (£8.17 Including VAT at 17.5%)
|  |
|
|
H60008 : Metal SF Mixing Lever (Set)
Metal SF Mixing Lever (Set)
Price: £12.61 (£14.82 Including VAT at 17.5%)
|  |
|
|
H60008-00: Metal SF Mixing Lever (Set) - Black
Standard on the Super Pro. NB; these are black not as pic.
Price: £12.61 (£14.82 Including VAT at 17.5%)
| |
|
|
H60008-1-84 : Metal SF Mixing Lever (Set) - Blue
Standard on Super Pro
Price: £12.61 (£14.82 Including VAT at 17.5%)
|  |
|
|
H60009 : Flybar Seesaw Holder
Price: £6.30 (£7.40 Including VAT at 17.5%)
|  |
|
|
H60010 : Metal Control Arm
Price: £10.00 (£11.75 Including VAT at 17.5%)
|  |
|
|
H60012 : Flybar Rod (2pcs)
Flybar Rod (2pcs)
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60005 : Metal Head Stopper
Metal Head Stopper
Price: £2.60 (£3.06 Including VAT at 17.5%)
| |
|
|
H60013 Main Shaft (2)
No Longer Availabl USe H60159
|  |
|
|
H60014 : Radius Control Arm (Set)
Price: £8.26 (£9.71 Including VAT at 17.5%)
|  |
|
|
H60016 : Metal Radius Control Arm (Set)
Metal Radius Control Arm (Set)
Price: £15.22 (£17.88 Including VAT at 17.5%)
|  |
|
|
H60018 : One-way Bearing Shaft
No Longer available use H60139
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
H60019-03 Main Drive Gear 92pcs) Grey
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
H60020 : Autorotation Tail Drive Gear (2pcs)
Autorotation Tail Drive Gear (2pcs)
Price: £7.82 (£9.19 Including VAT at 17.5%)
|  |
|
|
H60020-03 : Autorotation Tail Drive Gear
(2) - GreyAutorotation Tail Drive Gear - Use for T-REX 600/600 Nitro
Price: £7.82 (£9.19 Including VAT at 17.5%)
|  |
|
|
H60021T One Way Bearing
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
H60023 : Control Shaft (2pcs)
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
H60025 : Metal Elevator Lever
Metal Elevator Lever
Price: £13.03 (£15.31 Including VAT at 17.5%)
|  |
|
|
H60026 : Aileron Lever (Pair)
Price: £7.82 (£9.19 Including VAT at 17.5%)
|  |
|
|
H60027 : Metal Aileron Lever (Pair)
Metal Aileron Lever (Pair)
Price: £14.35 (£16.86 Including VAT at 17.5%)
|  |
|
|
H60027-1-84 : Metal Aileron Lever (Pair) - Blue
Use for T-REX 600/600 Nitro. Standard on the Super Pro
Price: £14.35 (£16.86 Including VAT at 17.5%)
|  |
|
|
H60027-00 : Metal Aileron Lever (Pair) - BLACK
Std on Super Pro
Price: £14.35 (£16.86 Including VAT at 17.5%)
| |
|
|
H60028 : Main Frame Parts
Main Frame Parts
Price: £11.29 (£13.27 Including VAT at 17.5%)
|  |
|
|
H60029 : Main Frame Set
Price: £65.21 (£76.62 Including VAT at 17.5%)
|  |
|
|
H60030 Canopy Mounting Bolt
Price: £1.96 (£2.30 Including VAT at 17.5%)
|  |
|
|
H60031 : Bearing Block (Set)
Price: £7.61 (£8.94 Including VAT at 17.5%)
|  |
|
|
H60034 : Tail Drive Gear Assembly
No longer available- Replaced by H60078T
Price: £6.95 (£8.17 Including VAT at 17.5%)
|  |
|
|
H60035 : Tail Boom Case
Price: £7.61 (£8.94 Including VAT at 17.5%)
|  |
|
|
H60036 : Tail Drive Belt
Tail Drive Belt
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
H60038 Landing Skid Set
Price: £6.95 (£8.17 Including VAT at 17.5%)
|  |
|
|
H60039 : Standard Cross Struts
Standard Cross Struts
Price: £3.91 (£4.59 Including VAT at 17.5%)
|  |
|
|
H60040 : 3D Cross Struts
3D Cross Struts
Price: £3.91 (£4.59 Including VAT at 17.5%)
|  |
|
|
H60042 : Tail Boom (2pcs)
Tail Boom (2pcs)
Price: £8.26 (£9.71 Including VAT at 17.5%)
|  |
|
|
H60043 : Tail Case
Tail Case
Price: £6.52 (£7.66 Including VAT at 17.5%)
|  |
|
|
H60044 Tail Rotor Control arm
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
H60045 : Tail Rotor Shaft Assembly (2pcs)
No longer Available -- Replaced by H60079T
Price: £5.65 (£6.64 Including VAT at 17.5%)
|  |
|
|
H60046 : Tail Pitch Assembly
Price: £5.87 (£6.90 Including VAT at 17.5%)
|  |
|
|
H60047 : Fin Set
Fin Set
Price: £6.08 (£7.14 Including VAT at 17.5%)
|  |
|
|
H60048 : CF Fin Set
Price: £12.17 (£14.30 Including VAT at 17.5%)
| |
|
|
H60052 : Tail Boom Brace
Tail Boom Brace
Price: £7.82 (£9.19 Including VAT at 17.5%)
|  |
|
|
H60053 : FG Canopy
FG Canopy Electric
Price: £21.73 (£25.53 Including VAT at 17.5%)
|  |
|
|
H60054 : Hook & Loop Fastening Tape (2pcs)
Hook & Loop Fastening Tape (2pcs)
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60060 : 11T Pinion (Helical)
11T Pinion (Helical)
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
H60061 : 13T Pinion (Helical)
13T Pinion (Helical)
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
H60062 : Main Gear 188T
Main Gear 188T (Helical) (2)
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
H60064 : Landing Skid Stops
Landing Skid Stops
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60065 Damper Rubbers
DAMPER RUBBER/BLACK 80 DEGREE
Price: £2.54 (£2.98 Including VAT at 17.5%)
|  |
|
|
H60070 Servo Linkage Rod
Price: £1.69 (£1.99 Including VAT at 17.5%)
|  |
|
|
H60071 Ball Link
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60074 : CARBON SERVO PLATE (6)
CARBON SERVO PLATE (6)
Price: £5.65 (£6.64 Including VAT at 17.5%)
|  |
|
|
H60077 : Ally' Tail Pitch Plate Assembly
T-REX metal tail pitch assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight
Price: £9.13 (£10.73 Including VAT at 17.5%)
|  |
|
|
H60078 : Ally' Tail Drive Gear Assembly
T-REX metal tail drive gear assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
Price: £6.95 (£8.17 Including VAT at 17.5%)
|  |
|
|
H60079 : Ally' Tail Pulley & Shaft Assembly
T-REX metal tail rotor shaft assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
H60081 : Ally' Main Blade Holders - Trex 600
No longer available use H60163
Price: £29.77 (£34.98 Including VAT at 17.5%)
|  |
|
|
H60082 : Ally' Horizontal Fin Clamp
Aluminium Horizontal Fin Clamp for the T-Rex 600Replaced by HN6036
Price: £3.82 (£4.49 Including VAT at 17.5%)
|  |
|
|
H60083 : CFK Tail Boom - TREX 600 Carbon Boom
Price: £19.12 (£22.47 Including VAT at 17.5%)
|  |
|
|
H60085 : Blade Tidy - TREX 600
Blade Tidy for the T-Rex 600
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
H60089 : Stainless Steel Ball Set TREX 600
Price: £6.08 (£7.14 Including VAT at 17.5%)
|  |
|
|
H60098 : Pre-Painted FG Canopy - Blue
Pre-Painted Fibreglass canopy for the T-Rex 600 in Blue & Yellow
Price: £35.64 (£41.88 Including VAT at 17.5%)
|  |
|
|
H60105 : Bearing (680ZZ/689ZZ) (3)
Replacement Bearings for the Main Shaft
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
H60108 : Flybar 440mm (2)
T-Rex 600Flybar rod x 2(F3x440mm) .19 £3.75 Including VAT at 17.5%
Price: £3.47 (£4.08 Including VAT at 17.5%)
|  |
|
|
H60110 : Align Blade Balancer 4-5mm
Suitable for most Main blades with a 4-5mm bolt hole. Can also be used with the Balancer for the T-Rex 450 (Part Number K10289A)
Price: £13.03 (£15.31 Including VAT at 17.5%)
|  |
|
|
H60111 : New 3D Cross Struts (2)
T-Rex 600 New landing skid with a lower profile, lowering the centre of gravity of the model for 3D.
Price: £4.34 (£5.10 Including VAT at 17.5%)
|  |
|
|
H60118 Tail Drive Shaft Conversion
H60118 : 600 Tail Drive Shaft ConversionComplete Torque Tail Drive Conversion for the T-Rex 600 including Aluminium Machined Tail Case.
Price: £65.21 (£76.62 Including VAT at 17.5%)
|  |
|
|
H60119 : H60119 : 600 Tail Drive Shaft
Replacement Torque tube with Bearing MR148ZZ x 1(F8xF14x4mm)
Price: £10.00 (£11.75 Including VAT at 17.5%)
|  |
|
|
H60120 : M3 Stainless Balls Set - TREX 600
M3 Stainless Balls Set - TREX 600
Price: £5.53 (£6.50 Including VAT at 17.5%)
|  |
|
|
H60121 : Front Tail Drive Gear Set
Front Tail Drive Gear Set for the T-Rex 600 Torque Tube
Price: £7.61 (£8.94 Including VAT at 17.5%)
|  |
|
|
H60121-03 : Front Tail Drive Gear Set
For use on the T-Rex 600E/Nitro No longer available use H60121
|  |
|
|
H60122 : Front Tail Drive Gear And Case Set
Replacement Front Tail Drive Gear & Case Set for the T-Rex 600 Torque Tube.
Price: £13.03 (£15.31 Including VAT at 17.5%)
|  |
|
|
H60123 : Tail Gear Set
Tail Gear Set for the T-Rex 600 Torque Tube.
Price: £7.61 (£8.94 Including VAT at 17.5%)
|  |
|
|
H60123-03 : Tail Gear Set - Grey
For use on the T-Rex 600E/Nitro No Longer available use
|  |
|
|
H60124 : Tail Drive Bearing Mount (2)
Tail Drive Bearing Supports & Bearings for the T-Rex 600
Price: £6.08 (£7.14 Including VAT at 17.5%)
|  |
|
|
H60126 : New Landing Skid 3D - T-Rex 600 (Various Colours)
New Lower profile undercarriage, thus improving the centre of gravity for 3D flying. Various Colours Available
Price: £4.34 (£5.10 Including VAT at 17.5%)
|  |
Choose colour
|
|
|
H60128 : NEW Carbon Tail Rotors - T-Rex 600
Use for T-REX 600/600 Nitro3K carbon fiber made, new light-weight design, improve the efficiency of tail blade to make more precision on tail rudder control.
Price: £12.17 (£14.30 Including VAT at 17.5%)
|  |
|
|
H60131 : 600 Carbon Fiber Night Blades/3K
Use for T-REX 600/600CFEach set of Night Blades is carefully constructed to maintain static balance for weight, these night blades provide excellent visual orientation for flying at night, use very bright LEDS and rechargeable Li-Ion battery (light weight, big capacity, long operation hour). Use 3K carbon fiber material, and unique forming technique, improve anti-twist, suitable for extreme 3D flight.
Price: £68.07 (£79.98 Including VAT at 17.5%)
|  |
|
|
H60132 : 600 Metal Tail Belt Unit Set
All Aluminium Tail Case for the T-Rex 600 with Belt Driven Tail. Includes complete casing with bearings & output shaft with Aluminium Pulley.
Price: £29.56 (£34.73 Including VAT at 17.5%)
|  |
|
|
H60133 -00: Ally' Tail Gearbox Assy' - Black
Std on Super Pro
Price: £38.25 (£44.94 Including VAT at 17.5%)
|  |
|
|
H60133 : Ally' Tail Gearbox Assy Blue
Std on Super Pro
Price: £38.25 (£44.94 Including VAT at 17.5%)
|  |
|
|
H60137 Skid Pipe (2)
Price: £3.91 (£4.59 Including VAT at 17.5%)
|  |
|
|
H60137-00 Skid Pipe Black (2)
Price: £3.91 (£4.59 Including VAT at 17.5%)
|  |
|
|
H60137-84 Skid Pipe Blue (2)
Price: £3.91 (£4.59 Including VAT at 17.5%)
|  |
|
|
H60138 : Flybar Paddles
Use for T-REX 600/600 Nitro
Price: £4.34 (£5.10 Including VAT at 17.5%)
|  |
|
|
H60139 One Way Brg Shaft
Price: £3.26 (£3.83 Including VAT at 17.5%)
| |
|
|
H60143 Carbon Paddles
Use for T-Rex 600E and Nitro
Price: £14.45 (£16.98 Including VAT at 17.5%)
| |
|
|
H60146 : 11T Pinion, Mod 0.7
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
H60147-01 : Torque Tube Front Drive Gear Set
Torque Tube Front Drive Gear Set, Use for T-REX 600/600 Nitro nb: now only available in white delrin.
Price: £15.22 (£17.88 Including VAT at 17.5%)
|  |
|
|
H60149 Canopy Grommet
Canopy Grommets, Use for T-REX 600/600 Nitro
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
H60159 Main mast (2)
2 shafts, 1 retaining collar, 2 retaining bolts & nuts
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
H60163-00 : Metal Main Rotor Holder Set (Black)
T-REX metal main rotor holder features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. Use for T-REX 600/600 Nitro.
Price: £32.17 (£37.80 Including VAT at 17.5%)
|  |
|
|
H60163T-78 Metal Main Rotor Grips
Price: £32.17 (£37.80 Including VAT at 17.5%)
| |
|
|
H60163-84 : Metal Main Rotor Holder Set (Blue)
T-REX metal main rotor holder features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. Use for T-REX 600/600 Nitro.
Price: £32.17 (£37.80 Including VAT at 17.5%)
|  |
|
|
H60164-00 : Metal Flybar Seesaw (Black)
T-REX metal flybar seesaw holder features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. Use for T-REX 600/600 Nitro.
Price: £15.64 (£18.38 Including VAT at 17.5%)
|  |
|
|
H60164-78 : Metal Flybar Seesaw (Grey)
Use for T-REX 600/600 Nitro
Price: £15.64 (£18.38 Including VAT at 17.5%)
|  |
|
|
H60164-84 : Metal Flybar Seesaw (Blue)
T-REX metal main rotor holder features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. Use for T-REX 600/600 Nitro.
Price: £15.64 (£18.38 Including VAT at 17.5%)
|  |
|
|
H60166 : 10T Pinions (2pcs) NEW
H60166 : 10T Pinions (2pcs) NEW
Price: £5.00 (£5.88 Including VAT at 17.5%)
|  |
|
|
H60170 : 600 Carbon Fiber Flybar Paddle
Use for T-REX 600/600 Nitro
Price: £14.77 (£17.35 Including VAT at 17.5%)
|  |
|
|
H60171 600E Painted Canopy Lightning Yellow
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
H60172 600E Painted Canopy Lightning Red
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
H60186T Metal Tail Pitch Lever
for Trex 500/600
Price: £6.69 (£7.86 Including VAT at 17.5%)
|  |
|
|
H60190 : 600D PRO CARBON FIBER BLADES
Newly developed 600D Pro carbon fiber main blades, constructed with proprietary technology utilizing high strength 3K carbon fiber wrapped light weight wood, allowing extreme 3D maneuvers and superb stability, as well as excellent autorotation characteristics. Use for T-REX 600/600CF/50 Engine Helicopter
Price: £40.84 (£47.99 Including VAT at 17.5%)
|  |
|
|
HN6001 Metal Flybar Control Unit
Price: £11.30 (£13.28 Including VAT at 17.5%)
|  |
|
|
HN6001-84 : Metal Flybar Control Arm - Blue
Use for T-REX 600/600 Nitro. Standard on the Super Pro.
Price: £11.30 (£13.28 Including VAT at 17.5%)
|  |
|
|
HN6001-00: Metal Flybar Control Arm - Black
Standard on Super Pro
Price: £11.30 (£13.28 Including VAT at 17.5%)
| |
|
|
HN6002 Main Gear Case
Price: £10.43 (£12.26 Including VAT at 17.5%)
|  |
|
|
HN6003T Clutch/Start Shaft Set
Price: £5.65 (£6.64 Including VAT at 17.5%)
|  |
|
|
HN6004T Pinion Set
Price: £7.39 (£8.68 Including VAT at 17.5%)
|  |
|
|
HN6005 : Clutch Bell Set
Price: £9.56 (£11.23 Including VAT at 17.5%)
|  |
|
|
HN6006 : Clutch Liner (2pcs)
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
HN6007 Eng. Brg. Block
Price: £6.95 (£8.17 Including VAT at 17.5%)
|  |
|
|
HN6008 Fuel Tank Rubber Mount
Price: £2.60 (£3.06 Including VAT at 17.5%)
|
|
|
HN6010 Eng Mount Set
Price: £10.20 (£11.99 Including VAT at 17.5%)
|  |
|
|
HN6011 Bearing Blocks
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
HN6012 CF Main Frame L
Price: £32.17 (£37.80 Including VAT at 17.5%)
|  |
|
|
HN6013 CF Main Frame R
Price: £32.17 (£37.80 Including VAT at 17.5%)
|  |
|
|
HN6015 Socket Screw
Price: £5.00 (£5.88 Including VAT at 17.5%)
|  |
|
|
Hn6016 Canopy Support Set
Price: £6.95 (£8.17 Including VAT at 17.5%)
|  |
|
|
HN6018 Ally hex Bolts (6)
Price: £5.65 (£6.64 Including VAT at 17.5%)
|  |
|
|
HN6019 Frame Mtg. Blocks- Ally
Price: £13.48 (£15.84 Including VAT at 17.5%)
|  |
|
|
HN6022 : Align 3 Way Fuel Filter
Universal 3 Way Fuel Filter with Clamp
Price: £3.25 (£3.82 Including VAT at 17.5%)
|  |
|
|
HN6023 Hook & Loop Tape 5mm
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
HN6024 : Receiver Mount
Price: £5.65 (£6.64 Including VAT at 17.5%)
|  |
|
|
HN6025T Eng Fan/Cooling Duct
Price: £10.00 (£11.75 Including VAT at 17.5%)
|  |
|
|
HN6027 : CF Bottom Plate
Price: £19.99 (£23.49 Including VAT at 17.5%)
|  |
|
|
HN6028 : Clutch
HN6028 : ClutchClutch and one way brg.
Price: £10.43 (£12.26 Including VAT at 17.5%)
|  |
|
|
HN6029 : Fan Hub
Price: £10.87 (£12.77 Including VAT at 17.5%)
|  |
|
|
HN6031T Tail Boom
Tail boom x 2(F20xF21.5x625mm)Tail control guide x 2, Rudder control rod(B) x 1(F2x657mm)Ball link x 2,
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
HN6032 : Bearings (6800ZZ, 695ZZ x 2)
Price: £4.78 (£5.62 Including VAT at 17.5%)
|  |
|
|
HN6033T F/G Canopy
HN6033 : Pre-painted FG Canopy (White,Blue,Yell) (600N)
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
HN6034 : Pre-painted FG Canopy (Red,Blue,Yell) (600N)
HN6034 : Pre-painted FG Canopy (Red,Blue,Yell) (600N)
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
HN6035 : FG Canopy - White (600N)
Price: £21.73 (£25.53 Including VAT at 17.5%)
|  |
|
|
HN6036 : Ally' Horizontal Fin Clamp
Price: £5.21 (£6.12 Including VAT at 17.5%)
|  |
|
|
HN6040 : FG Main Frame L / 1.6mm
Fiberglass main frame(l) x 1(1.6mm)Bearing mount x 1(F9xF15x4.5mm)Bearing MR95ZZ x 1(F5xF9x3mm)Fuel tank guard x 1Fuel line grommet x 1(F5.2xF7xF11x4.8mm)
Price: £16.09 (£18.91 Including VAT at 17.5%)
|  |
|
|
HN6041 : FG Main Frame R / 1.6mm
Fiberglass main frame(R) x 1(1.6mm)Bearing mount x 1(F9xF15x4.5mm)Bearing MR95ZZ x 1(F5xF9x3mm)Fuel tank guard x 1Fuel line grommet x 1(F5.2xF7xF11x4.8mm)
Price: £16.09 (£18.91 Including VAT at 17.5%)
|  |
|
|
HN6043 : Fiberglass Bottom Plate/2.0mm
Price: £11.30 (£13.28 Including VAT at 17.5%)
|  |
|
|
HN6046T Yellow Canopy (Plastic)
Price: £15.64 (£18.38 Including VAT at 17.5%)
|  |
|
|
HN6050 J Servo Horn
Servo Horn Set (3) for the T-Rex 600
<more>
Price: £2.52 (£2.96 Including VAT at 17.5%)
|  |
Choose_Type
|
|
|
HN6051T Gyro mount
For mounting a gyro, Increasing the strength of the main frame structure. It also includes shorter body posts to pull the rear of the canopy in a little to give more clearance on servos. Suitable for T-Rex 600 Nitro.
<more>
Price: £3.91 (£4.59 Including VAT at 17.5%)
|  |
|
|
HN6053T Anti Rotation Bracket
Use for T-REX 600N / 600 NP
Price: £3.26 (£3.83 Including VAT at 17.5%)
|  |
|
|
HN6060T Alloy Fan with Magnets
Price: £12.61 (£14.82 Including VAT at 17.5%)
|  |
|
|
HN6037T Servo Rod Set
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
HN6061 : Feathering Shaft Bush Set
For use on the T-Rex 600 Electric or Nitro
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
HN6062- Plastic Servo Retainers (8)
Use for T-REX 600/600 Nitro
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
HN6063T Red Boom
Anodised Red Booms for the 600E/N
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
HN6064T Auto Hub
New design of one-way bearing for preventing locking. Use for T-REX 600/600 Nitro
Price: £12.17 (£14.30 Including VAT at 17.5%)
|  |
|
|
HN6064-84 : Main Gear Case Assembly - Blue
New design of one-way bearing for preventing locking. Use for T-REX 600/600 Nitro. Standard on the Super Pro
Price: £12.17 (£14.30 Including VAT at 17.5%)
|  |
|
|
HN6064-00 : Main Gear Case Assembly - Black
New design of one-way bearing for preventing locking. Use for T-REX 600/600 Nitro. Standard on the Super Pro
Price: £12.17 (£14.30 Including VAT at 17.5%)
| |
|
|
HN6065 : Linkage Rod Set (A) Use for T-REX 600E/600 Nitro
Use for T-REX 600E/600 Nitro
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
HN6066 : CF Frame Brace Set
Price: £5.44 (£6.39 Including VAT at 17.5%)
|  |
|
|
HN6068 : 600N Metal Main Shaft Bearing Blocks
Price: £17.38 (£20.42 Including VAT at 17.5%)
|  |
|
|
HN6068-84 Metal Main Shaft Bearing Blocks Blue
Std on Super Pro
Price: £17.38 (£20.42 Including VAT at 17.5%)
|  |
|
|
HN6074 : Rotor Head Upgrade Assembly - 600
New Spec Swashplate that allows for increased cyclic travel to improve cyclic response, also the upgrade all metal washout assembly is ballraced on the washout links. This upgrade will fit either the T-Rex 600 Electric or the Nitro
Price: £33.90 (£39.83 Including VAT at 17.5%)
|  |
|
|
HN6074-84 : Rotor Head Upgrade Assembly - Blue
Std on Super Pro
Price: £33.90 (£39.83 Including VAT at 17.5%)
|  |
|
|
HN6074-00 : Rotor Head Upgrade Assembly - Black
Std on Super Pro
Price: £33.90 (£39.83 Including VAT at 17.5%)
| |
|
|
HN6076 : Stars/Stripes Pre-Painted FG Canopy
Stars/Stripes Pre-Painted FG Canopy for the T-Rex 600 Nitro
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
HN6080 : 600N Painted Canopy - Lightning Yellow
Pre-Painted Fibreglass Canopy for the T-Rex 600 Nitro.
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
HN6083 : Fuel Tank Fittings
Fuel Tank Fittings
Price: £4.34 (£5.10 Including VAT at 17.5%)
| |
|
|
HN6084T Servo Linkage rod
Price: £2.59 (£3.04 Including VAT at 17.5%)
| |
|
|
HN6085 Fuel Tank
Price: £6.52 (£7.66 Including VAT at 17.5%)
|
|
|
HN6086-00 : 600N Mixture Servo Mount CF
Price: £4.13 (£4.85 Including VAT at 17.5%)
|  |
|
|
HN6087-00 : 600N Switch Mount CF
Carbon fibre switch mount for the T-Rex 600 Nitro
Price: £4.13 (£4.85 Including VAT at 17.5%)
|  |
|
|
HN6088 : CANOPY CLIP - 600N
Replacement canopy clip for the T-Rex 600N
Price: £3.04 (£3.57 Including VAT at 17.5%)
|  |
|
|
HN6090 : Tail Boom : Black (2)
Std on Super Pro
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
HN6091-84 : Tail Boom (Blue) (2)
Replacement Anodised Blue Tail Booms for the T-Rex 600N. These are standard in the Super Pro.
Price: £8.69 (£10.21 Including VAT at 17.5%)
|  |
|
|
HN6092-00 : Metal Washout Arm - Black (2)
This is standard on the Super Pro.
Price: £13.03 (£15.31 Including VAT at 17.5%)
|  |
|
|
HN6092-84 Metal Washout Arms - Blue
Standard on Super Pro
Price: £13.03 (£15.31 Including VAT at 17.5%)
| |
|
|
HN6093 : 600N FG Canopy - White
Apply to 600 Nitro (Engine Helicopter)
Price: £13.90 (£16.33 Including VAT at 17.5%)
|  |
|
|
HN6094 : 600N Painted Canopy/Yellow
Apply to 600 Nitro (Engine Helicopter)
Price: £41.73 (£49.03 Including VAT at 17.5%)
|  |
|
|
HN6096 : Linkage Balls
Use for T-REX 600 Nitro metal main rotor holder. Linkage ball F(M3.5x4) x 2(F4.75x20.25mm)
Price: £2.60 (£3.06 Including VAT at 17.5%)
|  |
|
|
HN6097 : CF Tail Boom (600N SP)
Use for T-REX 600/600 Nitro
Price: £17.38 (£20.42 Including VAT at 17.5%)
|  |
|
|
HN6098 Damper Rubber
Price: £3.70 (£4.35 Including VAT at 17.5%)
| |
|
|
HN6099 : Servo Linkage Rod Set
Fits T-REX 600/600 Nitro
Price: £4.34 (£5.10 Including VAT at 17.5%)
|  |
|
|
HN6100 : Damper Rubber / Grey 70 Use for T-REX 600/600 Nitro
Price: £3.70 (£4.35 Including VAT at 17.5%)
|  |
|
|
HN6102-00 : Elevator Arm Set (Black) - 600N
Use for T-REX 600 Nitro, this item allows you to remove the anti-rotation device for the swashplate from your helicopter.
Price: £19.99 (£23.49 Including VAT at 17.5%)
|  |
|
|
HN6102-78 : 600 Elevator Arm Set/Grey
Use for T-REX 600 Nitro
Price: £19.99 (£23.49 Including VAT at 17.5%)
|  |
|
|
HN6102-84 : Elevator Arm Set (Blue) - 600N
Use for T-REX 600 Nitro, this item allows you to remove the anti-rotation device for the swashplate from your helicopter.
Price: £19.99 (£23.49 Including VAT at 17.5%)
|  |
|
|
HN6103-00 : Metal Tail Holder Assy (Black) - 600
Use for T-REX 600/600 Nitro/700 Nitro
Price: £17.38 (£20.42 Including VAT at 17.5%)
|  |
|
|
HN6103-84: Metal Tail Holder Assy (Blue) - 600
Use for T-REX 600/600 Nitro/700 Nitro
Price: £17.38 (£20.42 Including VAT at 17.5%)
|  |
|
|
HN6104 Frame Mounting Bolt
Aluminum frame mounting bolt x 2 (5x6x54mm)
Price: £2.59 (£3.04 Including VAT at 17.5%)
|  |
|
