| | |
HN7093T : Align 3G Flybarless Conversion (T-Rex 700) Ref: 3695
This is the new eagerly awaited official Flybarless conversion for the T-Rex 700. This includes the newly developed 3G Flybarless Electronics from Align and also all hardware to convert your T-Rex 700 to a fully flybarless helicopter. Release date is to be confirmed but is not expected to be too far away. Price is also subject to change, but we expect this will be correct, if there is any change it will be confirmed prior to shipping. You will not be charged until the day of despatch a pre-order will guarantee your place in the queue for what is expected to be very popular.
OUT OF STOCK In stock
Price: £280.84 (£329.99 Including VAT at 17.5%)
|  |
Colour
|
|
 |
HEP3GF02 : Align 3G USB Cable Ref: 3889
3G USB link cable incorporates a PC configuration GUI (graphical user interface) and the latest 3G firmware update (V2.1) to improve system stability, and added pirouette compensation to stabilize center point during pirouettes. This unit also allows full programmability of all the features of the 3G System from the PC
OUT OF STOCK In stock
Price: £20.42 (£23.99 Including VAT at 17.5%)
|  |
|
|
Align Super Starter for Helicopter STQ-100 Ref: 3696
HFSSTQ01 : Align Super Starter for Helicopter STQ-100 (YELLOW)
High Powered Geared Starter designed for use with any size engine from 30-90 Size Glow or upto 50cc. This includes a no-load hex starter extension that contains a double one-way bearing for increased durability. All of this is packaged in a very neat plastic case to keep it safe. There is space for an optional Aeroplane spinner attachment
OUT OF STOCK In stock
Price: £66.95 (£78.67 Including VAT at 17.5%)
|  |
Colour Preference
|
|
|
HE90H15T 90 size Muffler Align. Ref: 3653
Designed especially for 90 size engines - features more power , fuel-saving, low noise, and the highest air exhaust volume on the market.
Great design and test to three spaces: expansion chamber, accelerated section, silencer chamber, high efficiency and quick throttle response, great for 3D flying.
Use for O.S 91SR/HZ & ALIGN 91H/HP engine.
OUT OF STOCK In stock
Price: £59.96 (£70.45 Including VAT at 17.5%)
|  |
|
|
HN7002 : One-Way Bearing Set Ref: 3295
use for TRex 700
OUT OF STOCK In stock
Price: £42.54 (£49.98 Including VAT at 17.5%)
|  |
|
|
HN7003 : Thrust Bearing Ref: 3296
Use for Trex 700
OUT OF STOCK In stock
Price: £5.10 (£5.99 Including VAT at 17.5%)
|  |
|
|
HN7004 : Metal Main Rotor Holder Ref: 3297
use for TRex 700
OUT OF STOCK In stock
Price: £34.03 (£39.99 Including VAT at 17.5%)
| |
|
|
HN7005 : Metal Main Rotor Housing Ref: 3298
use for TRex 700
OUT OF STOCK In stock
Price: £23.82 (£27.99 Including VAT at 17.5%)
|  |
|
|
HN7006 : Metal Head Stopper Ref: 3299
use for TRex 700
OUT OF STOCK In stock
Price: £3.40 (£4.00 Including VAT at 17.5%)
|  |
|
|
HN7008 : Carbon Fibre Flybar Paddles Ref: 3300
use for TRex 700
OUT OF STOCK In stock
Price: £22.97 (£26.99 Including VAT at 17.5%)
|  |
|
|
HN7008T-00 : Carbon Fibre Flybar Paddles - Black Ref: 3864
use for TRex 700
OUT OF STOCK In stock
Price: £22.97 (£26.99 Including VAT at 17.5%)
| |
|
|
HN7009 : Flybar Rod /570mm Ref: 3301
use for TRex 700
OUT OF STOCK In stock
Price: £5.10 (£5.99 Including VAT at 17.5%)
|  |
|
|
HN7010 : Main Shaft Ref: 3302
use for TRex 700
OUT OF STOCK In stock
Price: £11.49 (£13.50 Including VAT at 17.5%)
|  |
|
|
HN7011 : Metal Washout Control Arm Ref: 3303
use for TRex 700
OUT OF STOCK In stock
Price: £13.61 (£15.99 Including VAT at 17.5%)
|  |
|
|
HN7012 : Metal SF Mixing Arm Ref: 3304
use for TRex 700
OUT OF STOCK In stock
Price: £14.46 (£16.99 Including VAT at 17.5%)
|  |
|
|
HN7013 : Metal Flybar Seesaw Holder Ref: 3305
use for TRex 700
OUT OF STOCK In stock
Price: £16.16 (£18.99 Including VAT at 17.5%)
|  |
|
|
HN7014 : Metal Flybar Control Arm Ref: 3306
use for TRex 700
OUT OF STOCK In stock
Price: £12.76 (£14.99 Including VAT at 17.5%)
|  |
|
|
HN7015 : Metal Washout Base Ref: 3307
use for TRex 700
OUT OF STOCK In stock
Price: £9.28 (£10.90 Including VAT at 17.5%)
|  |
|
|
HN7016 : Radius Arm Ref: 3308
use for TRex 700
OUT OF STOCK In stock
Price: £2.54 (£2.98 Including VAT at 17.5%)
|  |
|
|
HN7017 : Metal CCPM Swashplate Ref: 3309
use for TRex 700
OUT OF STOCK In stock
Price: £28.93 (£33.99 Including VAT at 17.5%)
|  |
|
|
HN7018 : One-Way Bearing Shaft Ref: 3310
use for TRex 700
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7019 : Main Drive Gear/164T Ref: 3311
use for TRex 700
OUT OF STOCK In stock
Price: £10.64 (£12.50 Including VAT at 17.5%)
|  |
|
|
HN7019AT : M1 Main Drive Gear/115T Ref: 3862
use for TRex 700 With M1 Gear Conversion
OUT OF STOCK In stock
Price: £10.64 (£12.50 Including VAT at 17.5%)
| |
|
|
HN7020 : Autorotation Tail Drive Gear Ref: 3312
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7021T : M1 Gear Conversion set Ref: 3863
Convert the Trex700 to Stronger M1 Gear Train
OUT OF STOCK In stock
Price: £20.00 (£23.50 Including VAT at 17.5%)
|  |
|
|
HN7020AT : M1 Autorotation Tail Drive Gear Ref: 3859
use for TRex 700 With M1 Gear conversion
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
| |
|
|
HN7022 Painted Canopy Ref: 3494
OUT OF STOCK In stock
Price: £48.50 (£56.99 Including VAT at 17.5%)
|  |
|
|
HN7023 : Control Shaft Ref: 3313
use for TRex 700
OUT OF STOCK In stock
Price: £4.68 (£5.50 Including VAT at 17.5%)
|  |
|
|
HN7024 : Damper Rubber Ref: 3314
use for TRex 700
OUT OF STOCK In stock
Price: £2.54 (£2.98 Including VAT at 17.5%)
|  |
|
|
HN7025 : Feathering Shaft Ref: 3315
use for TRex 700
OUT OF STOCK In stock
Price: £5.74 (£6.74 Including VAT at 17.5%)
|  |
|
|
HN7026 : Carbon Main Frame(L)/2.0mm Ref: 3316
use for TRex 700
OUT OF STOCK In stock
Price: £36.59 (£42.99 Including VAT at 17.5%)
|  |
|
|
HN7027 : Carbon Main Frame (R)/2.0mm Ref: 3317
use for TRex 700
OUT OF STOCK In stock
Price: £36.59 (£42.99 Including VAT at 17.5%)
|  |
|
|
HN7028 : Carbon Bottom Plate/2.5mm Ref: 3318
use for TRex 700
OUT OF STOCK In stock
Price: £22.97 (£26.99 Including VAT at 17.5%)
|  |
|
|
HN7029 : Carbon Stabiliser/2.0mm Ref: 3319
use for TRex 700
OUT OF STOCK In stock
Price: £12.34 (£14.50 Including VAT at 17.5%)
|  |
|
|
HN7030 : Engine Mount Ref: 3320
use for TRex 700
OUT OF STOCK In stock
Price: £10.20 (£11.99 Including VAT at 17.5%)
|  |
|
|
HN7031 : Metal Main Shaft Bearing Block Ref: 3321
use for TRex 700
OUT OF STOCK In stock
Price: £17.01 (£19.99 Including VAT at 17.5%)
|  |
|
|
HN7032 : 700 Carbon Fibre Tail Boom Ref: 3322
use for TRex 700
OUT OF STOCK In stock
Price: £19.15 (£22.50 Including VAT at 17.5%)
|  |
|
|
HN7033 : Elevator Arm Set Ref: 3323
use for TRex 700
OUT OF STOCK In stock
Price: £19.15 (£22.50 Including VAT at 17.5%)
|  |
|
|
HN7034 : Metal Aileron Lever Ref: 3324
use for TRex 700
OUT OF STOCK In stock
Price: £15.31 (£17.99 Including VAT at 17.5%)
|  |
|
|
HN7036 : Clutch/Starter Shaft Set Ref: 3325
use for TRex 700
OUT OF STOCK In stock
Price: £5.53 (£6.50 Including VAT at 17.5%)
|  |
|
|
HN7037 : Engine Gear Set Ref: 3326
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7037AT : M1 Engine Gear Set Ref: 3860
use for TRex 700 With M1 Gear Conversion
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
| |
|
|
HN7038 : Clutch Bell Set Ref: 3327
use for TRex 700
OUT OF STOCK In stock
Price: £11.06 (£13.00 Including VAT at 17.5%)
|  |
|
|
HN7039 : Clutch Ref: 3328
use for TRex 700
OUT OF STOCK In stock
Price: £11.91 (£13.99 Including VAT at 17.5%)
|  |
|
|
HN7040 : Clutch Liner Ref: 3329
use for TRex 700
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7041 : Metal Tail Plane Clamp Ref: 3330
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7042 : Torque Tube Rear Drive Gear Set Ref: 3331
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7043 : Torque Tube Front Drive Gear Set Ref: 3332
use for TRex 700
OUT OF STOCK In stock
Price: £7.65 (£8.99 Including VAT at 17.5%)
|  |
|
|
HN7043AT : M1 Torque Tube Front Drive Gear Set Ref: 3861
use for TRex 700 With M1 Gear Conversion
OUT OF STOCK In stock
Price: £7.65 (£8.99 Including VAT at 17.5%)
| |
|
|
HN7044 : Fuel Tank Guard Ref: 3333
use for TRex 700
OUT OF STOCK In stock
Price: £5.32 (£6.25 Including VAT at 17.5%)
|  |
|
|
HN7045 : Fuel Tank Ref: 3334
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7046 : Tail Boom Case Ref: 3335
use for TRex 700
OUT OF STOCK In stock
Price: £10.20 (£11.99 Including VAT at 17.5%)
|  |
|
|
HN7047 : Aluminium Tail Boom - Black Ref: 3336
use for TRex 700
OUT OF STOCK In stock
Price: £11.06 (£13.00 Including VAT at 17.5%)
|  |
|
|
HN7048 : Aluminium Hexagonal Bolt Ref: 3337
use for TRex 700
OUT OF STOCK In stock
Price: £4.25 (£4.99 Including VAT at 17.5%)
|  |
|
|
HN7049 : Skid Pipe Ref: 3338
use for TRex 700
OUT OF STOCK In stock
Price: £3.83 (£4.50 Including VAT at 17.5%)
|  |
|
|
HN7050 : Receiver Mount Ref: 3339
use for TRex 700
OUT OF STOCK In stock
Price: £7.02 (£8.25 Including VAT at 17.5%)
|  |
|
|
HN7051 : Engine Fan Cover Set Ref: 3340
use for TRex 700
OUT OF STOCK In stock
Price: £9.79 (£11.50 Including VAT at 17.5%)
|  |
|
|
HN7052 : Engine Fan Ref: 3341
use for TRex 700
OUT OF STOCK In stock
Price: £5.53 (£6.50 Including VAT at 17.5%)
|  |
|
|
HN7053 : 700N Metal Tail Torque Tube Unit Ref: 3342
use for TRex 700
OUT OF STOCK In stock
Price: £38.29 (£44.99 Including VAT at 17.5%)
|  |
|
|
HN7054 : 700N Tail Shaft Slide Bush Ref: 3343
use for TRex 700
OUT OF STOCK In stock
Price: £4.68 (£5.50 Including VAT at 17.5%)
|  |
|
|
HN7055 : Tail Boom Brace Ref: 3344
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7056 : Torque Tube Ref: 3345
use for TRex 700
OUT OF STOCK In stock
Price: £9.35 (£10.99 Including VAT at 17.5%)
|  |
|
|
HN7057 : Carbon Fibre Tail Blade Ref: 3346
use for TRex 700
OUT OF STOCK In stock
Price: £13.61 (£15.99 Including VAT at 17.5%)
|  |
|
|
HN7058 : Ball Link Ref: 3347
use for TRex 700
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7059 : Canopy Grommetts Ref: 3348
use for TRex 700
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7060 : 700N Frame Brace Set(CF Ref: 3349
use for TRex 700
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7061 : 690D Carbon Fibre Main Blades Ref: 3797
Use for T-REX 700 Nitro Pro
OUT OF STOCK In stock
Price: £59.57 (£69.99 Including VAT at 17.5%)
|  |
|
|
HN7062 : 690C Carbon Fibre Main Blades Ref: 3798
Use for T-REX 700 Nitro Pro
OUT OF STOCK In stock
Price: £56.16 (£65.99 Including VAT at 17.5%)
|  |
|
|
HN7063 : Main Blade Linkage Rod Set Ref: 3509
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7064 : Servo Linkage Rod Set Ref: 3510
OUT OF STOCK In stock
Price: £4.68 (£5.50 Including VAT at 17.5%)
|  |
|
|
HN7065 : Linkage Ball Set Ref: 3464
Linkage ball A(M4x5) x 2(F5x24mm)
Linkage ball B(M3x4) x 15(F5x12mm)
Linkage ball C(M3x3.5) x 9(F5x8.5mm)
Linkage ball C(M2x5) x 1(F5x10mm)
OUT OF STOCK In stock
Price: £6.17 (£7.25 Including VAT at 17.5%)
|  |
|
|
HN7066 Bearing (6800ZZ) 4 pcs Ref: 1798
B/Holder
OUT OF STOCK In stock
Price: £5.95 (£6.99 Including VAT at 17.5%)
| |
|
|
HN7067 Bearing (MR104zz,MF105ZZ) 4pcs Ref: 1800
Seesaw
OUT OF STOCK In stock
Price: £5.32 (£6.25 Including VAT at 17.5%)
| |
|
|
HN7069 Bearing (F683ZZ) 2pcs Ref: 1807
Elevator Arm
OUT OF STOCK In stock
Price: £4.68 (£5.50 Including VAT at 17.5%)
| |
|
|
HN7070 bearing (6702ZZ) 2pcs Ref: 1811
Auto Unit
OUT OF STOCK In stock
Price: £5.74 (£6.74 Including VAT at 17.5%)
| |
|
|
HN7071 : Parts Bag Ref: 1831
OUT OF STOCK In stock
Price: £2.54 (£2.98 Including VAT at 17.5%)
|  |
|
|
HN7072 : Blade Tidy Ref: 1834
Use for T-REX 700 Nitro Pro.
Ultra-high hardness foam, high wear resistance, makes your blades more stable
OUT OF STOCK In stock
Price: £5.74 (£6.74 Including VAT at 17.5%)
|  |
|
|
HN7073 : Tail Rotor Control Arm Ref: 1836
OUT OF STOCK In stock
Price: £5.74 (£6.74 Including VAT at 17.5%)
|  |
|
|
HN7074 : Elevator Servo Mount Ref: 1837
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7075 : Main Shaft Spacer Set Ref: 1966
OUT OF STOCK In stock
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
HN7076 : Tail Case Parts Bag Ref: 1968
OUT OF STOCK In stock
Price: £5.95 (£6.99 Including VAT at 17.5%)
|  |
|
|
HN7077 : Canopy Mount Set Ref: 2267
OUT OF STOCK In stock
Price: £4.89 (£5.75 Including VAT at 17.5%)
|  |
|
|
HN7082T : Engine Fan Mount Ref: 3851
OUT OF STOCK In stock
Price: £12.75 (£14.98 Including VAT at 17.5%)
| |
|
|
HN7084 Front Frame Mount Ref: 3662
Front frame mount x 2 (10.5x18x53mm)
Socket button head collar screw x 8 (M3x10mm)
OUT OF STOCK In stock
Price: £5.74 (£6.74 Including VAT at 17.5%)
|  |
|
|
HN7085 Bearing(6901ZZ) Ref: 3660
Bearing 6901ZZ x 2 (12x24x6mm)
OUT OF STOCK In stock
Price: £5.10 (£5.99 Including VAT at 17.5%)
|  |
|
|
HN7086 : METAL TAIL CONTROL ARM - TREX 700 Ref: 2309
OUT OF STOCK In stock
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
HN7087T : Metal Engine Bearing Block Set - Trex 700 Ref: 2310
OUT OF STOCK In stock
Price: £19.12 (£22.47 Including VAT at 17.5%)
|  |
|
|
HN7099T : 3G Linkage Ball (Blade grip) Ref: 3879
OUT OF STOCK In stock
| |
|
|
HN7100T : Align 600/700FL Linkage rod(A) set Ref: 3885
OUT OF STOCK In stock
Price: £2.97 (£3.49 Including VAT at 17.5%)
|  |
|
|
HE90H01 ALIGN 91H Engine Ref: 3394
MADE IN JAPAN ALIGN Hyper engine for superior 91 size helicopter.Delivers more horsepower for higher rotor speeds.New design for crankcase, provides good support to the crankshaft and ball bearing.Besides good looks and excellent cooling, this engine has machined black alumite heat sink head also boosts combustion efficiency for more power stability.
OUT OF STOCK In stock
Price: £207.35 (£243.64 Including VAT at 17.5%)
|  |
|
|
HE90H02 Align 91HP Engine Ref: 3395
MADE IN JAPAN ALIGN Hyper engine for superior 91 size helicopter.Delivers more horsepower for higher rotor speeds.New design for crankcase, provides good support to the crankshaft and ball bearing.Besides good looks and excellent cooling, this engine is machined blue alumite heat sink head also boosts combustion efficiency for more power stability.
OUT OF STOCK In stock
Price: £211.26 (£248.23 Including VAT at 17.5%)
|  |
|
