| | |
Align Super Starter for Helicopter STQ-100 Ref: 3696
HFSSTQ01 : Align Super Starter for Helicopter STQ-100 (YELLOW)High Powered Geared Starter designed for use with any size engine from 30-90 Size Glow or upto 50cc. This includes a no-load hex starter extension that contains a double one-way bearing for increased durability. All of this is packaged in a very neat plastic case to keep it safe. There is space for an optional Aeroplane spinner attachment
Price: £66.95 (£78.67 Including VAT at 17.5%)
|  |
Colour Preference
|
|
 |
K10390A : Align Dial Pitch Gauge Ref: 3463
Smart design, small size, built strong for easy and reliable use. Supports blade sizes from 300-700mm ,blade width 62mm with a pitch range of ± 15°. Laser geared dial for pitch selection to an accuracy of 0.01 degrees. Use for T-REX 450/500/600/700.
Price: £10.64 (£12.50 Including VAT at 17.5%)
|  |
|
|
Heli tool Kit in zip case Ref: 581
Rc System High grade 7pc short driver set and 3 Pc Pliers in a zip case
4 Hex drivers 1.5,2,2.5,3mm
2 Hex socket 5.5,7mm
1 Exhaust spring tool
3 Pliers ( Nippers/ Ball Link/ Long nose)
Price: £23.47 (£27.58 Including VAT at 17.5%)
|  |
|
|
CARBON FIBRE SHEETS Ref: 3664
NHP Carbon Fibre sheet is produced using high pressure and temperature (80 tons, 120 degrees c) to give superior strength and rigidity. The sheet lay-up is a multi-axial lay up, not only are the fibres laid at 0 and 90 degrees but also +45 and -45 degrees providing exceptional rigidity.Available in the following sizes:Dimensions 1.5 mm 2.00 mm 3.00 mm 800x600 mm £129.99 £149.99 £184.99600x400 mm £70.19 £80.99 £99.89400x300 mm £37.91 £43.74 £53.94300x200 mm £20.47 £23.62 £29.13200x150 mm £11.05 £12.75 £15.73 All prices are inclusive of 15% VAT
|  |
|
|
YEI-RX72 : Radix 72mm Tail Blades Ref: 3402
Ideal for Trex 500 and similar sized helis
Price: £19.12 (£22.47 Including VAT at 17.5%)
|  |
|
|
YEI-RX59 : Radix 59mm Tail Blades Ref: 3401
Ideal for the Trex 450 and other 400 size models
Price: £12.16 (£14.29 Including VAT at 17.5%)
| |
|
|
ELY Q VOLTAGE REGULATOR Ref: 3403
New Programmable Voltage Regulator, allowing the use of any 2 Cell Lithium pack or 5-7 Cell Nicad/Nimh Pack. It also has fully programmable outputs Programmable multioutputs for the servos of 5Volts, 6Volts, 7,2Volts, Transparent mode
Price: £41.70 (£49.00 Including VAT at 17.5%)
|  |
|
|
K10381TA 5.1v two way step down regulator Ref: 3196
For some servos such as Futaba servo models 9241, 9251, 9253, 9254, 9255, 9256 and other digital servos are not capable of handling 6V, please connect a 5.1V step-down voltage regulator to the rudder servo, or connect it between BEC (ex. RCE-B6X) and the receiver for all servos. It could avoid the servos overloading and damage.
Price: £3.62 (£4.25 Including VAT at 17.5%)
|  |
|
|
SPMVR5203 : SPEKTRUM DUAL VOLTAGE REGULATOR Ref: 3108
The VR5203 provides regulated voltage protection for up to two servo functions with two input ports and two output ports. This unique component eliminates the danger of higher voltage power systems to standard voltage servos by being placed in between the receiver and the servo needing regulation. This allows the rest of the system to work at a desired voltage.
<more>
Price: £21.27 (£24.99 Including VAT at 17.5%)
|  |
|
|
3DX Cap Ref: 1245
OFFICIAL 3DX Merchandise
you can only buy this cap from the 3DX head office or Key Sponsers
<pic>
Price: £4.21 (£4.95 Including VAT at 17.5%)
|  |
|
|
Transmitter Mitt by Radiowarm Ref: 1894
RAYDIOWARM™ - The multilayer Mitt system for complete protection
Manufactured to the highest standards, using only top quality materials. The unique RAYDIOWARM™ multilayer system offers effective weather and damage protection for your transmitter.
The mitt also protects against cold. Helps keep hands warm for longer. Helps extend battery life. Protects your transmitter. More sensitive control without gloves
Choice of colours/combinations.
more
Price: £34.00 (£39.95 Including VAT at 17.5%)
|  |
Colour Choice
|
|
|
Wooden blades - 60 cm Ref: 44
Price: £13.57 (£15.94 Including VAT at 17.5%)
|  |
|
|
Wooden blades - 55cm Ref: 43
Price: £11.87 (£13.95 Including VAT at 17.5%)
| |
|
|
Con Rod Locking Tool 30/50 size Ref: 843
Price: £10.17 (£11.95 Including VAT at 17.5%)
|
|
By OS
Fits in rear of engine and enables you to remove stubborn crank nuts and fans without any possible damage to the engine.
|
|
Con Rod Locking Tool 60/90 size Ref: 844
Price: £10.17 (£11.95 Including VAT at 17.5%)
|
|
By MacGregor
Fits in rear of engine and enables you to remove stubborn crank nuts and fans without any possible damage to the engine.
|
|
7 Piece Mini Tool Set Century UK Ref: 2548
CUK-T-MINI : Century UK 7 Piece Mini Tool Set
7 piece Mini Tool set containing Hex: 1.5mm 2mm 2.5mm - Box: 4mm 5.5mm - Scr: 1 Flat & 1 Crosshead
Price: £10.20 (£11.99 Including VAT at 17.5%)
|  |
|
|
Ball Link Sizing Tool Ref: 847
Price: £4.71 (£5.53 Including VAT at 17.5%)
|
|
Small ball reamer that will alllow you to size your ball links for smooth free movement.
|
|
Ball Link Pliers Ref: 638
Quality spring loaded pliers for the safe removal of ball links
Price: £9.79 (£11.50 Including VAT at 17.5%)
|  |
|
|
Glow Driver with meter Ref: 797
Glow Driver with Ammeter
supplied with Charger and 1800mah Battery.
Price: £12.17 (£14.30 Including VAT at 17.5%)
|  |
|
|
Hex Drivers Super Ref: 798
Super Pro Hex Drivers
4 Alloy Knurled Handle Drivers and super hard ground bits
Price: £16.96 (£19.93 Including VAT at 17.5%)
|  |
|
|
Compact Hi-torque Starter Ref: 2316
High Torque Starter for 30-60 class helicopter. Compact Size
Lightweight and powerful by use of 550 size motor and gear box, c/w 200mm hex start shaft (removable type)
Requires 7.2 V 1800 mah Nicd battery pack for use.
For 60 size or above class helicopter, recommended to use 7.2v 3300 mah ni-mh or larger
Price: £21.73 (£25.53 Including VAT at 17.5%)
|  |
|
|
ECONOMY STARTER Ref: 225
Price: £21.70 (£25.50 Including VAT at 17.5%)
|  |
|
|
SULLIVAN DYNATRON Ref: 799
Sulliavan Dynatron Super Hi-Torque Starter
The Worlds most powerfull starter (thats what it says on the box)
Heavy Duty, Long Life
For 12volt or 24volt operation
Price: £78.22 (£91.91 Including VAT at 17.5%)
|  |
|
|
SULLIVAN HI-TORK Ref: 224
Heavy Duty Long Life 12v motor
Hi-Torque to start most engines
Price: £50.39 (£59.21 Including VAT at 17.5%)
|  |
|
|
Economy Hex Start Ref: 185
6mm Hex Start Adapter
Hardened 6mm ball
Price: £8.50 (£9.99 Including VAT at 17.5%)
|  |
|
|
Hex Start Adapter Ref: 227
6mm Hex Start Adapter with One-Way Bearing
Price: £22.97 (£26.99 Including VAT at 17.5%)
|  |
|
|
PADDED RX STRAP Ref: 187
Padded Reciever Strap with Velcro Fixing
NHP Logo
Price: £2.72 (£3.20 Including VAT at 17.5%)
|  |
|
|
HEADLOADERS 30/50 Size Ref: 218
Headloaders 30 > 50 size 3 > 4mm bolt fixings.
Made from hi-tensile strength alloy and tested to the highest of headspeeds to ensure structural safety.
supplied with reducing bush 4 > 3mm.
Enables quick and easy set up of mixtures
Check for Glitches at varying throttle openings and head speeds.
Price: £18.68 (£21.95 Including VAT at 17.5%)
|  |
|
|
HEADLOADERS 60/90 Size Ref: 216
Headloaders 60 >90 size 4 >5mm bolt fixings.
Made from hi-tensile strength alloy and tested to the highest of headspeeds to ensure structural safety.
supplied with reducing bush 5 > 4mm.
Enables quick and easy set up of mixtures
Check for Glitches at varying throttle openings and head speeds.
Price: £24.64 (£28.95 Including VAT at 17.5%)
| |
|
|
JR NECK STRAP Ref: 239
Price: £8.65 (£10.16 Including VAT at 17.5%)
|
|
|
FUTABA NECK STRAP De-Luxe Ref: 814
Price: £7.23 (£8.50 Including VAT at 17.5%)
|
|
|
JR TRAINER LEAD Ref: 238
Price: £6.80 (£7.99 Including VAT at 17.5%)
|
|
|
JR H/D SWITCH Ref: 237
Price: £11.73 (£13.78 Including VAT at 17.5%)
|
|
|
Glow clip Ref: 253
Price: £3.36 (£3.95 Including VAT at 17.5%)
|  |
|
|
Training Undercarraige 30-50 size from QUK Ref: 3532
An absolute MUST for any beginner. This durable training undercarriage uses high impact Fibre Glass struts with high visibility balls to give your model a wide, stable base and aid orientation. Available to suit 30 - 60 size models.
Price: £15.28 (£17.95 Including VAT at 17.5%)
|  |
|
|
Training Undercarraige 60 size from Quick UK Ref: 3533
An absolute MUST for any beginner. This durable training undercarriage uses high impactfibre glass struts with high visibility balls to give your model a wide, stable base and aid orientation. Available to suit 30 - 60 size models.
Price: £16.98 (£19.95 Including VAT at 17.5%)
| |
|
