| | |
 | Mikado Modellhubschrauber Ref: 830
Logo 400 Logo 500 Logo 600 Logo 14 Logo 10 Logo 24
Mikado Helicopters are the only dedicated manufacturer of electric Helicopters in the world. Over the last 10 years Ralph Buxnowitz and Inge Lasser have worked tirelessly together to produce the range of models that you see today. They have taken full advantage from the technological developments in brushless motors and speed controllers and latterly the massive increase in battery capacity with lithium polymer cells.
If you think that electric helicopters do not have the performance of glow models, then look again. The duration is often longer for the same power and what is even better with electric power is you don't have a needle valve to adjust, there is no glow plug to get tired, the motor does not flood or misfire and you will not believe how smooth and vibration free an electric motor is. Regardless of weather conditions electric motors run consistently flight after flight. Just charge the battery take the model to the flight line, do your pre-flight checks and enjoy 10 to 20 minutes of quiet, smooth and relaxing flying or extreme 3D.
The flying performance speaks for its self, you only have to look at which top flyers around the world are using Mikado helicopters for duration, performance and environmentally friendly image of low noise and smoke free flying.
If you are looking for the best range of all round electric helicopters for beginner to expert 3D flying, then look no further than the Logo 10, Logo 14, Logo 400, Logo 500, Logo 600 & Logo 24 Bionic.
|
|
|
 |
Recommended Accessories Ref: 317
|
|
Check out the Battery and Motor sections for Ni-cads, Li-Poly, Kontronik and Plettenburg motor sets for these models.
|
|
V bar 4010 Ref: 3173
Digital rotor heads are here: With the Virtual Flybar System (“V-Bar”)4010 is Without Air Pressure Sensor
Price: £295.61 (£347.34 Including VAT at 17.5%)
|  |
|
|
Logo 400 kit 2260 Ref: 3405
The LOGO 400 series is Mikado’s newest helicopter design.
Alongside the many quality characteristics typical of Mikado products, the LOGO 400 features a rotor diameter of approx. 1 meter (430 mm rotor blades) and an ultra low RTF weight permitting the use of small inexpensive LiPo batteries.
This makes it very easy for novices to enter into the exciting world of electric heli flying.
Price: £173.87 (£204.30 Including VAT at 17.5%)
|  |
|
|
LOGO 400 kit with VBar head 2262 Ref: 3460
That LOGO 400 V-Stabi is the first model helicopter world-wide in the 1-Meter-class, which is supplied with the Virtual Flybar system. Enjoy the incomparable digital flight behavior with more performance and longer flying times compared to helicopters with conventional mechanical paddle systems.
Price: £243.43 (£286.03 Including VAT at 17.5%)
|  |
|
|
Logo 400 with Hacker Power Set 2261 Ref: 3485
New Logo 400 kit with flybar
Hacker A4- 12S 8 pole Motor / X70-SB-Pro controller
Price: £269.52 (£316.69 Including VAT at 17.5%)
|  |
|
|
Logo 400 with Hacker power set and Vbar Electronics 2264 Ref: 3624
2264 Logo 400 kit with Vbar head, Vbar Electronics and Hacker power set.
Price: £591.26 (£694.73 Including VAT at 17.5%)
|  |
|
|
Logo 500 3D Ref: 2403
Like the DX version, LOGO 500 3D will perform excellent with a 5S pack. If equipped with a 6S pack however, you will go to a completely new dimension of heli flying. The kit includes several extras for 3D flying, such as all levers fully ball-raced, aluminium swashplate, and light 3D paddles.
NOW SUPPLIED WITH AN AIRBRUSHED CANOPY
<more>
Price: £313.00 (£367.78 Including VAT at 17.5%)
|  |
|
|
logo 600 3D Ref: 2405
Herringbone main gear. Fully ball-raced. Constant tail drive.
Hardened hollow 10 mm main rotor shaft. 8 mm head spindle.
25 mm diameter tail boom. Carbon tail boom support.
Carbon tail rotor case. Carbon vertical and horizontal fins. Carbon control rod for tail.
Thrust-bearing set for tail rotor. Alu swashplate.
Specifications: Rotor Diameter: 1250 to 1450 mm. Rotor blades: 600/620/650 mm.
Gear ratio main rotor: 8.1 to 12.9; Mod. 0.7.
Weight: 3.2 kg and up. Battery: 6S to 10S LiPo cells.
<more>
Price: £417.38 (£490.42 Including VAT at 17.5%)
|  |
|
|
Logo 600 3d with VBar head Ref: 3245
As above but ready for the V Bar fly-bar-less system
Price: £460.83 (£541.48 Including VAT at 17.5%)
| |
|
